51 to 60 of 3,469 Results
Aug 4, 2026 - HLRS-exaFOAM
Cunha Galeazzo, Flavio Cesar; Ruopp, Andreas, 2024, "exaFOAM Industrial Benchmark B6 - Offshore Wind Park", https://doi.org/10.18419/DARUS-3975, DaRUS, V2
This work is part of the exaFOAM project, aimed at optimizing the open-source CFD software OpenFOAM for massively parallel HPC architectures and overcoming performance bottlenecks. In the analysis of wind parks, the flow around the wind turbines is dominated by small-scale fluid dynamics (< 2 km), which in turn depends on mesoscale atmosphere dynam... |
Aug 4, 2026 - Institute of Aerospace Thermodynamics
Schulte, Kathrin; Wurst, Jonathan, 2026, "Replication Data for: Finger splashing of droplet impacts onto submillimeter microstructures", https://doi.org/10.18419/DARUS-6353, DaRUS, V1
Supplementary material to the manuscript: J. Wurst, K. Schulte, "Finger splashing of droplet impacts onto submillimeter microstructures", referred to as "related publication" in the following: The process of finger splashing during droplet impact onto cubic pillars is investigated by means of direct numerical simulations. The mechanism as well as t... |
Aug 3, 2026 - Holm group
Drotleff, Jannik; Tovey, Samuel; Hohenberger, Paul; Lohrmann, Christoph; Hoßbach, Julian; Nikolaou, Konstantin; Holm, Christian, 2026, "Replication Data for: "Reinforcement Learning Enables Autonomous Microrobot Navigation and Intervention in Simulated Blood Capillaries"", https://doi.org/10.18419/DARUS-6350, DaRUS, V1
This dataset contains all scripts and files to replicate the results of our paper "Reinforcement Learning Enables Autonomous Microrobot Navigation and Intervention in Simulated Blood Capillaries". It includes simulation data, analysis outputs, and precomputed results. The files are organized by workflow stage: field generation, training, deployment... |
Jul 31, 2026 - Material Programming
Kiesewetter, Laura; Sahin, Ekin Sila; Marsillo, Laura; Cheng, Tiffany; Menges, Achim, 2026, "Double-Curved Self-Shaping Wood Chair: Geometry, Fabrication, and Performance Data", https://doi.org/10.18419/DARUS-6124, DaRUS, V1
This dataset documents the geometry, fabrication, structural performance, and self-shaping process of a double-curved wooden chair shell prototype. It contains design geometry, fabrication files, 3D scan data, structural-performance documentation, interval photographs, and image metadata. The dataset supports the documentation and validation of a m... |
Jul 30, 2026 - Associated Research
Jenadeleh, Mohsen; Sneyers, Jon; Ascenso, João, 2026, "JPEG AIC2026: Fine-grained image compression dataset", https://doi.org/10.18419/DARUS-6156, DaRUS, V2, UNF:6:XijMAc83sLBGJd3690d0/g== [fileUNF]
Recent advances in conventional and learning-based image coding have increased the demand for benchmark datasets that support fine-grained assessment of compressed image quality, particularly for learning-based image compression methods. The data in this dataset represent Assessment of Image Coding 2026 (AIC2026), a large-scale dataset for high-fid... |
Jul 30, 2026 - ANDroMeDA
Schurig, Fabian, 2026, "Wind profiles from ANDroMeDA measurement UAV at the WINSENT test site", https://doi.org/10.18419/DARUS-6101, DaRUS, V1, UNF:6:k72al266V99VER+IHmvHdw== [fileUNF]
The data was acquired at the WINSENT test site behind the Northern turbine and was measured during two profile flights. The UAV2 and UAV3 started and were slowly rising up to 100m and slowly descending. This was performed two times each flight. |
Jul 30, 2026 - LIDAR
Schurig, Fabian; Fürst, Holger, 2026, "Fixed 4-Beam Scanning LiDAR Wind Data at WINSENT Test Site (31 March 2025)", https://doi.org/10.18419/DARUS-6103, DaRUS, V1, UNF:6:+gHb+HgFkqsmAb8s71f9dw== [fileUNF]
Scanning LiDAR measurements conducted at the WINSENT test site on 31 March 2025. The SWE Scanning LiDAR Gamma (SWE203) was installed on MM_SE (Latitude: 48.664033° N Longitude: 9.837811° E) at 72.5 m height above ground (737.33m AMSL) and operated with a fixed 4-beam scan trajectory towards MM_NW. The beam directions were configured to sample close... |
Jul 30, 2026 - ANDroMeDA
Schurig, Fabian, 2026, "Intensive observation period wind measurements (IOP) from ANDroMeDA measurement UAV at the WINSENT test site", https://doi.org/10.18419/DARUS-5533, DaRUS, V1, UNF:6:72zeA2JnzWwGcsUVxThPEw== [fileUNF]
The data was acquired at the WINSENT test site in the wake of the turbines on the 31.03.2025. The dataset consists of two UAV (uav2/uav4) that were flying behind each other at multiple heights in the wake of the northern turbine. |
Jul 30, 2026 - ANDroMeDA
Schurig, Fabian, 2026, "Wind measurements from ANDroMeDA measurement UAV at the WINSENT test site close to metmast NW", https://doi.org/10.18419/DARUS-6100, DaRUS, V1, UNF:6:OGPBM5/95zA7lSDirgAF2A== [fileUNF]
The data was acquired at the WINSENT test site close to the NW metmast. |
Jul 30, 2026 - Dataverse-PN-X
Brunn, Malte, 2026, "Replication Data for: Optimized Algorithms for Image Registration on Heterogeneous Hardware", https://doi.org/10.18419/DARUS-6336, DaRUS, V1
This dataset contains scripts and result files to reproduce the numerical experiments of my thesis titled "Optimized Algorithms for Image Registration on Heterogeneous Hardware". claire-thesis-maltebrunn.tar.gz contains the software source files for CLAIRE developed in this thesis. Build instructions, dependencies and the latest published version o... |
