PN 1

SimTech EXC 2075 Project Network 1 "Data-integrated models and methods for multiphase fluid dynamics"

Featured Dataverses

In order to use this feature you must have at least one published or linked dataverse.

Publish Dataverse

Are you sure you want to publish your dataverse? Once you do so it must remain published.

Publish Dataverse

This dataverse cannot be published because the dataverse it is in has not been published.

Delete Dataverse

Are you sure you want to delete your dataverse? You cannot undelete this dataverse.

21 to 30 of 43 Results

Efficient three-material PLIC Implementation as Fortran Module Mar 1, 2022 - Subarea A7 Potyka, Johanna; Kromer, Johannes, 2022, "Efficient three-material PLIC Implementation as Fortran Module", https://doi.org/10.18419/DARUS-2488, DaRUS, V1 The dataset provides a Fortran module with the code for the efficient three-phase positioning method.
Code for relative permeabilities for two-phase flow between parallel plates with slip conditions Nov 24, 2021 - PN 1-6 Schulz, Sebastian; Bringedal, Carina; Ackermann, Sina, 2021, "Code for relative permeabilities for two-phase flow between parallel plates with slip conditions", https://doi.org/10.18419/DARUS-2241, DaRUS, V1 This MATLAB code calculates relative permeabilities of two fluids flowing between two parallel plates, depending on their viscosities, saturation and boundary conditions at the top and bottom plates. The underlying assumptions behind the derivation are shown in the pdf "overview_relativepermeabilities.pdf", where also the resulting equations are li...
micro-XRCT data sets of subflorescent salt crusts from evaporation of MgSO4 solution with 0.96 mol/L initial concentration Sep 9, 2021 - Publication: Porosity and Permeability of Subflorescent Salt Crusts Formed by Evaporation From Porous Media Ruf, Matthias; Lee, Dongwon; Piotrowski, Joseph; Huisman, Johan Alexander; Steeb, Holger, 2021, "micro-XRCT data sets of subflorescent salt crusts from evaporation of MgSO4 solution with 0.96 mol/L initial concentration", https://doi.org/10.18419/DARUS-2003, DaRUS, V1 This data set contains data of scans of three separated dry salt crusts that formed by evaporation of magnesium sulfate solution with 0.96 mol/L initial concentration from F32 quartz sand at 40%, 30%, and 25% saturation inside the sand packing. The cylindrical sample holder from polymethyl methacrylat (PMMA) had a diameter of 31 mm and a wall thick...
micro-XRCT data sets of subflorescent salt crusts from evaporation of MgSO4 solution with 0.32 mol/L initial concentration Sep 9, 2021 - Publication: Porosity and Permeability of Subflorescent Salt Crusts Formed by Evaporation From Porous Media Ruf, Matthias; Lee, Dongwon; Piotrowski, Joseph; Huisman, Johan Alexander; Steeb, Holger, 2021, "micro-XRCT data sets of subflorescent salt crusts from evaporation of MgSO4 solution with 0.32 mol/L initial concentration", https://doi.org/10.18419/DARUS-2002, DaRUS, V1 This data set contains data of scans of three separated dry salt crusts that formed by evaporation of magnesium sulfate solution with 0.32 mol/L initial concentration from F32 quartz sand at 40%, 30%, and 20% saturation inside the sand packing. The cylindrical sample holder from polymethyl methacrylat (PMMA) had a diameter of 31 mm and a wall thick...
micro-XRCT data sets of subflorescent salt crusts from evaporation of MgSO4 solution with 0.64 mol/L initial concentration Sep 6, 2021 - Publication: Porosity and Permeability of Subflorescent Salt Crusts Formed by Evaporation From Porous Media Ruf, Matthias; Lee, Dongwon; Piotrowski, Joseph; Huisman, Johan Alexander; Steeb, Holger, 2021, "micro-XRCT data sets of subflorescent salt crusts from evaporation of MgSO4 solution with 0.64 mol/L initial concentration", https://doi.org/10.18419/DARUS-1848, DaRUS, V1 This data set contains data of scans of three separated dry salt crusts that formed by evaporation of magnesium sulfate solution with 0.64 mol/L initial concentration from F32 quartz sand at 40%, 30%, and 20% saturation inside the sand packing. The cylindrical sample holder from polymethyl methacrylat (PMMA) had a diameter of 31 mm and a wall thick...
Simulation input scripts for "Electronic screening using a virtual Thomas-Fermi fluid for predicting wetting and phase transitions of ionic liquids at metal surfaces" Aug 20, 2021 - Paper Nature Materials 2021 Schlaich, Alexander, 2021, "Simulation input scripts for "Electronic screening using a virtual Thomas-Fermi fluid for predicting wetting and phase transitions of ionic liquids at metal surfaces"", https://doi.org/10.18419/DARUS-2115, DaRUS, V1 This dataset includes the basic simulation scripts needed in order to reproduce the data shown in "Electronic screening using a virtual Thomas-Fermi fluid for predicting wetting and phase transitions of ionic liquids at metal surfaces". The folder structure corresponds to the individual parts of the paper, more detail is given in the individual REA...
Humidity and thermal triggered Shape Memory Effect - Rheology-based numerical modelling - Thermal Humid Mechanical Cycle Jun 22, 2021 - Publication: Humidity and thermal triggered Shape Memory Effect - Rheology-based numerical modelling Fauser, Dominik; Steeb, Holger, 2021, "Humidity and thermal triggered Shape Memory Effect - Rheology-based numerical modelling - Thermal Humid Mechanical Cycle", https://doi.org/10.18419/DARUS-2023, DaRUS, V1, UNF:6:kJCrJ2myXSEklpfIfr7AfQ== [fileUNF] This data contains a Thermal Humid Mechanical Cycle (THMC) of Shape Memory Polymers (SMP). The SMP is a polyurethane-based Polymer, which is produced from SMP Technologies Inc. The SMP filament were processed with a 3D printer (Ultimaker 3, Ultimaker, Geldermarsen, Netherlands). The THMC is divided into a preheating step, a programming step and a s...
Humidity and thermal triggered Shape Memory Effect - Rheology-based numerical modelling - Dynamic Mechanical Thermal Humidity Analysis Jun 22, 2021 - Publication: Humidity and thermal triggered Shape Memory Effect - Rheology-based numerical modelling Fauser, Dominik; Steeb, Holger, 2021, "Humidity and thermal triggered Shape Memory Effect - Rheology-based numerical modelling - Dynamic Mechanical Thermal Humidity Analysis", https://doi.org/10.18419/DARUS-2021, DaRUS, V1, UNF:6:YC87IXxORCLw3+woYmYT3A== [fileUNF] This data contains iso-thermal and iso-humid shear frequency-sweep measurements of Shape Memory Polymers (SMP). The SMP is a polyurethane-based Polymer, which is produced from SMP Technologies Inc. The SMP filament were processed with a 3D printer (Ultimaker 3, Ultimaker, Geldermarsen, Netherlands). Frequency-sweeps were performed in a temperature...
Humidity and thermal triggered Shape Memory Effect - Rheology-based numerical modelling - Diffusion measurements Jun 22, 2021 - Publication: Humidity and thermal triggered Shape Memory Effect - Rheology-based numerical modelling Fauser, Dominik; Kuhn, Moritz; Steeb, Holger, 2021, "Humidity and thermal triggered Shape Memory Effect - Rheology-based numerical modelling - Diffusion measurements", https://doi.org/10.18419/DARUS-2024, DaRUS, V1, UNF:6:ig+5CuLNRHaoCQtncwbvWA== [fileUNF] This data contains diffusion measurements of Shape Memory Polymers (SMP) immersed in demineralized water. The SMP is a polyurethane-based Polymer, which is produced from SMP Technologies Inc. The SMP filament were processed with a 3D printer (Ultimaker 3, Ultimaker, Geldermarsen, Netherlands). The samples were dried in a drying oven for 10 days pri...
micro-XRCT data sets of a stone mastic asphalt drill core before and after a uniaxial compression test (sample 2): sample 2-3 Jun 7, 2021 - Publication: Asphalt Ruf, Matthias; Teutsch, Tim; Alber, Stefan; Steeb, Holger; Ressel, Wolfram, 2021, "micro-XRCT data sets of a stone mastic asphalt drill core before and after a uniaxial compression test (sample 2): sample 2-3", https://doi.org/10.18419/DARUS-1834, DaRUS, V1, UNF:6:QoLna7YlKfmQGxjSgS9yUA== [fileUNF] This data set contains two micro X-ray Computed Tomography (micro-XRCT) data sets resulting from region of interest scans (diameter 58.32 mm, height 46.06 mm) of the center region of a stone mastic asphalt (SMA) drill core. The drill core was scanned with identical scanner settings before ("reconstructed_20200505_01.tar.gz") and after ("reconstruct...

Efficient three-material PLIC Implementation as Fortran Module

Mar 1, 2022 - Subarea A7

Potyka, Johanna; Kromer, Johannes, 2022, "Efficient three-material PLIC Implementation as Fortran Module", https://doi.org/10.18419/DARUS-2488, DaRUS, V1

The dataset provides a Fortran module with the code for the efficient three-phase positioning method.

Code for relative permeabilities for two-phase flow between parallel plates with slip conditions

Nov 24, 2021 - PN 1-6

Schulz, Sebastian; Bringedal, Carina; Ackermann, Sina, 2021, "Code for relative permeabilities for two-phase flow between parallel plates with slip conditions", https://doi.org/10.18419/DARUS-2241, DaRUS, V1

This MATLAB code calculates relative permeabilities of two fluids flowing between two parallel plates, depending on their viscosities, saturation and boundary conditions at the top and bottom plates. The underlying assumptions behind the derivation are shown in the pdf "overview_relativepermeabilities.pdf", where also the resulting equations are li...

micro-XRCT data sets of subflorescent salt crusts from evaporation of MgSO4 solution with 0.96 mol/L initial concentration

Sep 9, 2021 - Publication: Porosity and Permeability of Subflorescent Salt Crusts Formed by Evaporation From Porous Media

Ruf, Matthias; Lee, Dongwon; Piotrowski, Joseph; Huisman, Johan Alexander; Steeb, Holger, 2021, "micro-XRCT data sets of subflorescent salt crusts from evaporation of MgSO4 solution with 0.96 mol/L initial concentration", https://doi.org/10.18419/DARUS-2003, DaRUS, V1

This data set contains data of scans of three separated dry salt crusts that formed by evaporation of magnesium sulfate solution with 0.96 mol/L initial concentration from F32 quartz sand at 40%, 30%, and 25% saturation inside the sand packing. The cylindrical sample holder from polymethyl methacrylat (PMMA) had a diameter of 31 mm and a wall thick...

micro-XRCT data sets of subflorescent salt crusts from evaporation of MgSO4 solution with 0.32 mol/L initial concentration

Sep 9, 2021 - Publication: Porosity and Permeability of Subflorescent Salt Crusts Formed by Evaporation From Porous Media

Ruf, Matthias; Lee, Dongwon; Piotrowski, Joseph; Huisman, Johan Alexander; Steeb, Holger, 2021, "micro-XRCT data sets of subflorescent salt crusts from evaporation of MgSO4 solution with 0.32 mol/L initial concentration", https://doi.org/10.18419/DARUS-2002, DaRUS, V1

This data set contains data of scans of three separated dry salt crusts that formed by evaporation of magnesium sulfate solution with 0.32 mol/L initial concentration from F32 quartz sand at 40%, 30%, and 20% saturation inside the sand packing. The cylindrical sample holder from polymethyl methacrylat (PMMA) had a diameter of 31 mm and a wall thick...

micro-XRCT data sets of subflorescent salt crusts from evaporation of MgSO4 solution with 0.64 mol/L initial concentration

Sep 6, 2021 - Publication: Porosity and Permeability of Subflorescent Salt Crusts Formed by Evaporation From Porous Media

Ruf, Matthias; Lee, Dongwon; Piotrowski, Joseph; Huisman, Johan Alexander; Steeb, Holger, 2021, "micro-XRCT data sets of subflorescent salt crusts from evaporation of MgSO4 solution with 0.64 mol/L initial concentration", https://doi.org/10.18419/DARUS-1848, DaRUS, V1

This data set contains data of scans of three separated dry salt crusts that formed by evaporation of magnesium sulfate solution with 0.64 mol/L initial concentration from F32 quartz sand at 40%, 30%, and 20% saturation inside the sand packing. The cylindrical sample holder from polymethyl methacrylat (PMMA) had a diameter of 31 mm and a wall thick...

Simulation input scripts for "Electronic screening using a virtual Thomas-Fermi fluid for predicting wetting and phase transitions of ionic liquids at metal surfaces"

Aug 20, 2021 - Paper Nature Materials 2021

Schlaich, Alexander, 2021, "Simulation input scripts for "Electronic screening using a virtual Thomas-Fermi fluid for predicting wetting and phase transitions of ionic liquids at metal surfaces"", https://doi.org/10.18419/DARUS-2115, DaRUS, V1

This dataset includes the basic simulation scripts needed in order to reproduce the data shown in "Electronic screening using a virtual Thomas-Fermi fluid for predicting wetting and phase transitions of ionic liquids at metal surfaces". The folder structure corresponds to the individual parts of the paper, more detail is given in the individual REA...

Humidity and thermal triggered Shape Memory Effect - Rheology-based numerical modelling - Thermal Humid Mechanical Cycle

Jun 22, 2021 - Publication: Humidity and thermal triggered Shape Memory Effect - Rheology-based numerical modelling

Fauser, Dominik; Steeb, Holger, 2021, "Humidity and thermal triggered Shape Memory Effect - Rheology-based numerical modelling - Thermal Humid Mechanical Cycle", https://doi.org/10.18419/DARUS-2023, DaRUS, V1, UNF:6:kJCrJ2myXSEklpfIfr7AfQ== [fileUNF]

This data contains a Thermal Humid Mechanical Cycle (THMC) of Shape Memory Polymers (SMP). The SMP is a polyurethane-based Polymer, which is produced from SMP Technologies Inc. The SMP filament were processed with a 3D printer (Ultimaker 3, Ultimaker, Geldermarsen, Netherlands). The THMC is divided into a preheating step, a programming step and a s...

Humidity and thermal triggered Shape Memory Effect - Rheology-based numerical modelling - Dynamic Mechanical Thermal Humidity Analysis

Jun 22, 2021 - Publication: Humidity and thermal triggered Shape Memory Effect - Rheology-based numerical modelling

Fauser, Dominik; Steeb, Holger, 2021, "Humidity and thermal triggered Shape Memory Effect - Rheology-based numerical modelling - Dynamic Mechanical Thermal Humidity Analysis", https://doi.org/10.18419/DARUS-2021, DaRUS, V1, UNF:6:YC87IXxORCLw3+woYmYT3A== [fileUNF]

This data contains iso-thermal and iso-humid shear frequency-sweep measurements of Shape Memory Polymers (SMP). The SMP is a polyurethane-based Polymer, which is produced from SMP Technologies Inc. The SMP filament were processed with a 3D printer (Ultimaker 3, Ultimaker, Geldermarsen, Netherlands). Frequency-sweeps were performed in a temperature...

Humidity and thermal triggered Shape Memory Effect - Rheology-based numerical modelling - Diffusion measurements

Jun 22, 2021 - Publication: Humidity and thermal triggered Shape Memory Effect - Rheology-based numerical modelling

Fauser, Dominik; Kuhn, Moritz; Steeb, Holger, 2021, "Humidity and thermal triggered Shape Memory Effect - Rheology-based numerical modelling - Diffusion measurements", https://doi.org/10.18419/DARUS-2024, DaRUS, V1, UNF:6:ig+5CuLNRHaoCQtncwbvWA== [fileUNF]

This data contains diffusion measurements of Shape Memory Polymers (SMP) immersed in demineralized water. The SMP is a polyurethane-based Polymer, which is produced from SMP Technologies Inc. The SMP filament were processed with a 3D printer (Ultimaker 3, Ultimaker, Geldermarsen, Netherlands). The samples were dried in a drying oven for 10 days pri...

micro-XRCT data sets of a stone mastic asphalt drill core before and after a uniaxial compression test (sample 2): sample 2-3

Jun 7, 2021 - Publication: Asphalt

Ruf, Matthias; Teutsch, Tim; Alber, Stefan; Steeb, Holger; Ressel, Wolfram, 2021, "micro-XRCT data sets of a stone mastic asphalt drill core before and after a uniaxial compression test (sample 2): sample 2-3", https://doi.org/10.18419/DARUS-1834, DaRUS, V1, UNF:6:QoLna7YlKfmQGxjSgS9yUA== [fileUNF]

This data set contains two micro X-ray Computed Tomography (micro-XRCT) data sets resulting from region of interest scans (diameter 58.32 mm, height 46.06 mm) of the center region of a stone mastic asphalt (SMA) drill core. The drill core was scanned with identical scanner settings before ("reconstructed_20200505_01.tar.gz") and after ("reconstruct...

Add Data

Share Dataverse

Link Dataverse

Reset Modifications