Featured Dataverses

In order to use this feature you must have at least one published or linked dataverse.

Publish Dataverse

Are you sure you want to publish your dataverse? Once you do so it must remain published.

Publish Dataverse

This dataverse cannot be published because the dataverse it is in has not been published.

Delete Dataverse

Are you sure you want to delete your dataverse? You cannot undelete this dataverse.

Advanced Search

101 to 110 of 172 Results
Dec 2, 2021 - Density-driven dissolution of CO2 in karst water
Class, Holger; Bürkle, Pascal; Trötschler, Oliver; Zimmer, Martin; Strauch, Bettina, 2021, "Data for: On the role of density-driven dissolution of CO2 in karstification", https://doi.org/10.18419/DARUS-2040, DaRUS, V1, UNF:6:MLmw+UrdmPEjg9Db5HtPDw== [fileUNF]
Summary: Data of the "density-driven dissolution of CO2 in karst water" column experiment. A laboratory column was filled with tapwater (water level 5,55 m) and exposed it to an elevated gaseous CO2-concentration, roughly 50 times the current atmospheric concentration (20000 +/- 5000 ppm). After stripping the water with ambient air, it was initiall...
Nov 2, 2021 - Code for effective heat conductivity in thin porous media
Scholz, Lena; Bringedal, Carina, 2021, "Code for effective heat conductivity in thin porous media", https://doi.org/10.18419/DARUS-2026, DaRUS, V2
This code can be used to determine the effective heat conductivity of a thin periodic porous medium by solving a two- or three-dimensional local cell problem on pore scale using the software Netgen/NGSolve. The pore geometry of the representative cell and the boundary conditions on top and bottom can be set by the user. The same holds for the heat...
Oct 8, 2021 - C05: Process-dependent porosity-permeability relations for fluid-solid reactions in porous media
Piotrowski, Joseph; Huisman, Johan Alexander, 2021, "Sample Properties, Evaporation Data, and Pressure Measurements of MgSO4 Crusts on F32 Quartz Sand From 0.96 mol/L, 0.64 mol/L, and 0.32 mol/L Initial Concentration", https://doi.org/10.18419/DARUS-1861, DaRUS, V2, UNF:6:xYGrTts04RzpxXSLpfQHTA== [fileUNF]
The dataset contains data from evaporation of magnesium sulfate solution with an initial concentration of 0.96 mol/L, 0.64 mol/L, and 0.32 mol/L from F32 quartz sand. Additionally, pressure measurement of the separated and dried crusts from 40%, 30%, and 20(25)% saturation inside of the sample are provided using dry nitrogen gas (dynamic viscosity...
Oct 7, 2021 - Simulation of flow in deformable fractures using a quasi-Newton based partitioned coupling approach
Jaust, Alexander; Schmidt, Patrick, 2021, "Replication Data for: Simulation of flow in deformable fractures using a quasi-Newton based partitioned coupling approach", https://doi.org/10.18419/DARUS-1778, DaRUS, V1
This repository contains simulation data and postprocessing scripts used in the publication: Schmidt, P., Jaust, A., Steeb, H., Schulte, M.: "Simulation of flow in deformable fractures using a quasi-Newton based partitioned coupling approach". Computational Geosciences (2022). doi:10.1007/s10596-021-10120-8. The three cases presented in the paper a...
Sep 9, 2021 - Verification benchmarks for single-phase flow in three-dimensional fractured porous media
Gläser, Dennis, 2021, "Case 3 - Small Features", https://doi.org/10.18419/DARUS-2081, DaRUS, V1
This dataset contains results related to the benchmark case 3 as described in detail in the call for participation. The sub-folder "reference" contains solutions for pressure in both the fractures and the bulk porous matrix on five different refinement levels. The naming scheme is as follows: CASENAME_SIMULATIONTYPE_DOMAIN_REFINEMENT-00001.vtu, whe...
Sep 9, 2021 - Publication: Porosity and Permeability of Subflorescent Salt Crusts Formed by Evaporation From Porous Media
Ruf, Matthias; Lee, Dongwon; Piotrowski, Joseph; Huisman, Johan Alexander; Steeb, Holger, 2021, "micro-XRCT data sets of subflorescent salt crusts from evaporation of MgSO4 solution with 0.96 mol/L initial concentration", https://doi.org/10.18419/DARUS-2003, DaRUS, V1
This data set contains data of scans of three separated dry salt crusts that formed by evaporation of magnesium sulfate solution with 0.96 mol/L initial concentration from F32 quartz sand at 40%, 30%, and 25% saturation inside the sand packing. The cylindrical sample holder from polymethyl methacrylat (PMMA) had a diameter of 31 mm and a wall thick...
Sep 9, 2021 - Publication: Porosity and Permeability of Subflorescent Salt Crusts Formed by Evaporation From Porous Media
Ruf, Matthias; Lee, Dongwon; Piotrowski, Joseph; Huisman, Johan Alexander; Steeb, Holger, 2021, "micro-XRCT data sets of subflorescent salt crusts from evaporation of MgSO4 solution with 0.32 mol/L initial concentration", https://doi.org/10.18419/DARUS-2002, DaRUS, V1
This data set contains data of scans of three separated dry salt crusts that formed by evaporation of magnesium sulfate solution with 0.32 mol/L initial concentration from F32 quartz sand at 40%, 30%, and 20% saturation inside the sand packing. The cylindrical sample holder from polymethyl methacrylat (PMMA) had a diameter of 31 mm and a wall thick...
Sep 6, 2021 - Publication: Porosity and Permeability of Subflorescent Salt Crusts Formed by Evaporation From Porous Media
Ruf, Matthias; Lee, Dongwon; Piotrowski, Joseph; Huisman, Johan Alexander; Steeb, Holger, 2021, "micro-XRCT data sets of subflorescent salt crusts from evaporation of MgSO4 solution with 0.64 mol/L initial concentration", https://doi.org/10.18419/DARUS-1848, DaRUS, V1
This data set contains data of scans of three separated dry salt crusts that formed by evaporation of magnesium sulfate solution with 0.64 mol/L initial concentration from F32 quartz sand at 40%, 30%, and 20% saturation inside the sand packing. The cylindrical sample holder from polymethyl methacrylat (PMMA) had a diameter of 31 mm and a wall thick...
Add Data

Log in to create a dataverse or add a dataset.

Share Dataverse

Share this dataverse on your favorite social media networks.

Link Dataverse
Reset Modifications

Are you sure you want to reset the selected metadata fields? If you do this, any customizations (hidden, required, optional) you have done will no longer appear.