1 to 4 of 4 Results
Mar 17, 2023
Hinze, Christoph, 2023, "Replication Data for: Increasing the Dynamic Accuracy of Ball Screw Drives with Quasi-Sliding-Mode (qSMC) Position Control", https://doi.org/10.18419/darus-3292, DaRUS, V1
To increase the dynamics of ball screw drives, a nonlinear position controller, based on sliding-mode control, is presented together with its parameterization for robust stability. The controller is validated experimentally on a ball screw axis and shown increase the controller b... |
Nov 3, 2022
Hinze, Christoph; Zeh, Lukas, 2022, "Validation data for comparison of SMC-PI controllers vs. P-PI controller", https://doi.org/10.18419/darus-3152, DaRUS, V1
Experimental comparison for sliding mode position controllers vs. P position controller. Please refer to Readme.md contained in the dataset for more detailed information. SMC-like controllers are: Quasi SMC qSMC with sign(s)~s/(|s| + \epsilon), k_s = 1250, epsilon=5, varying gain... |
Nov 3, 2022
Hinze, Christoph; Zeh, Lukas, 2022, "Identification data for plant and friction identification", https://doi.org/10.18419/darus-3003, DaRUS, V1
Dataset for identification of a ball screw setup. Please refer to Readme.md contained in the dataset for more detailed information. Stribeck fricton with constant velocities (const_v*.mat) Slow measurement along whole axis for synchronization errors (const_vel:*.mat) slow sine fo... |
Nov 2, 2022
Hinze, Christoph, 2022, "Identification data for Linear Direct Drive Forces compensation", https://doi.org/10.18419/darus-2563, DaRUS, V1
Linear direct drive forces are identified for compensation, where a linear direct drive is mounted in parallel to a ball screw feed drive axis. Please refer to Readme.md contained in the dataset for more detailed information. Nut forces are measured via 4 parallel KISTLER force s... |