EXC IntCDC Research Project 3 'Co-Design of Multi-Storey Timber Building Systems for Building Stock Extension'

RP3-1: Computational design, engineering and development of digitally fabricated multi-storey wood building system.
RP3-2: Co-design, adaptation, integration and optimization of multi-storey timber building systems for building stock extension.

Featured Dataverses

In order to use this feature you must have at least one published or linked dataverse.

Publish Dataverse

Are you sure you want to publish your dataverse? Once you do so it must remain published.

Publish Dataverse

This dataverse cannot be published because the dataverse it is in has not been published.

Delete Dataverse

Are you sure you want to delete your dataverse? You cannot undelete this dataverse.

11 to 15 of 15 Results

Floor Plate Segmentation Data Jul 12, 2023 - EXC IntCDC RP 3: Multi-Storey Wood Building System Orozco, Luis; Krtschil, Anna; Wagner, Hans Jakob; Knippers, Jan; Menges, Achim, 2023, "Floor Plate Segmentation Data", https://doi.org/10.18419/DARUS-3539, DaRUS, V1 This repository contains the geometric results of six developed computational floor plate segmentation methods as applied to sixteen example floor plans. It includes the floor plate boundaries, column locations, and plate edges for each resulting segmentation, as well as the geometry results of their respective nesting studies. This data set offers...
Supplemental Materials for: Comparative Evaluation of Bipartite, Node-Link, and Matrix-Based Network Representations Aug 9, 2022 - EXC IntCDC Research Project 12 'Computational Co-Design Framework for Fibre Composite Building Systems' Abdelaal, Moataz; Schiele, Nathan Daniel; Angerbauer, Katrin; Kurzhals, Kuno; Sedlmair, Michael; Weiskopf, Daniel, 2022, "Supplemental Materials for: Comparative Evaluation of Bipartite, Node-Link, and Matrix-Based Network Representations", https://doi.org/10.18419/DARUS-3100, DaRUS, V1 The supplemental materials of the paper titled Comparative Evaluation of Bipartite, Node-Link, and Matrix-Based Network Representations, which was accepted for presentation at IEEE VIS 2022 conference. The structure of the folder is as follows: . └── code \|── NetworkGeneration # the R code to generate the network data \|── NetworkVis...
Experimental data for: A finger-joint based edge connection for the weak direction of CLT plates Apr 12, 2022 - IntCDC Tapia Camú, Cristóbal; Claus, Marian, 2021, "Experimental data for: A finger-joint based edge connection for the weak direction of CLT plates", https://doi.org/10.18419/DARUS-1344, DaRUS, V2, UNF:6:3YMGPmWE9BG0uaF+T4A8HQ== [fileUNF] This repository contains the experimental data collected for the newly developed plate-to-plate connection during the Master's Thesis of Marian Claus. The data corresponds to the two different connection geometries, tested under two different loading conditions: (i) pure bending and (ii) shear bending conditions. For all the experiments, global and...
Replication Models for: A finger-joint based edge connection for the weak direction of CLT plates Apr 6, 2022 - Publications Tapia Camú, Cristóbal; Claus, Marian, 2022, "Replication Models for: A finger-joint based edge connection for the weak direction of CLT plates", https://doi.org/10.18419/DARUS-1259, DaRUS, V1 This repository contains the implementation of the analytical and numerical models described and used in the paper to model the developed edge connection for CLT plates in the weak direction. The connection was developed within the frame of the cluster "Integrative Computational Design and Construction for Architecture" (IntCDC) of the University o...
Replication Data for: Bond line characteristics of a new screw-glued edge connection for the secondary load-bearing direction of CLT plates Sep 24, 2021 - IntCDC Tapia Camú, Cristóbal; Claus, Marian; Aicher, Simon, 2021, "Replication Data for: Bond line characteristics of a new screw-glued edge connection for the secondary load-bearing direction of CLT plates", https://doi.org/10.18419/DARUS-2153, DaRUS, V1, UNF:6:dSQ9iue/duvwotJZTCj2XQ== [fileUNF] This repository contains experimental data obtained from block shear tests performed on the bond surfaces of the connection for CLT plates presented in a related paper. Additional to the recorded shear strengths, the thickness of the bond surface was recorded at different locations, which was used to create a 2D contour plot of the thickness distri...

Floor Plate Segmentation Data

Jul 12, 2023 - EXC IntCDC RP 3: Multi-Storey Wood Building System

Orozco, Luis; Krtschil, Anna; Wagner, Hans Jakob; Knippers, Jan; Menges, Achim, 2023, "Floor Plate Segmentation Data", https://doi.org/10.18419/DARUS-3539, DaRUS, V1

This repository contains the geometric results of six developed computational floor plate segmentation methods as applied to sixteen example floor plans. It includes the floor plate boundaries, column locations, and plate edges for each resulting segmentation, as well as the geometry results of their respective nesting studies. This data set offers...

Supplemental Materials for: Comparative Evaluation of Bipartite, Node-Link, and Matrix-Based Network Representations

Aug 9, 2022 - EXC IntCDC Research Project 12 'Computational Co-Design Framework for Fibre Composite Building Systems'

Abdelaal, Moataz; Schiele, Nathan Daniel; Angerbauer, Katrin; Kurzhals, Kuno; Sedlmair, Michael; Weiskopf, Daniel, 2022, "Supplemental Materials for: Comparative Evaluation of Bipartite, Node-Link, and Matrix-Based Network Representations", https://doi.org/10.18419/DARUS-3100, DaRUS, V1

The supplemental materials of the paper titled Comparative Evaluation of Bipartite, Node-Link, and Matrix-Based Network Representations, which was accepted for presentation at IEEE VIS 2022 conference. The structure of the folder is as follows: . └── code |── NetworkGeneration # the R code to generate the network data |── NetworkVis...

Experimental data for: A finger-joint based edge connection for the weak direction of CLT plates

Apr 12, 2022 - IntCDC

Tapia Camú, Cristóbal; Claus, Marian, 2021, "Experimental data for: A finger-joint based edge connection for the weak direction of CLT plates", https://doi.org/10.18419/DARUS-1344, DaRUS, V2, UNF:6:3YMGPmWE9BG0uaF+T4A8HQ== [fileUNF]

This repository contains the experimental data collected for the newly developed plate-to-plate connection during the Master's Thesis of Marian Claus. The data corresponds to the two different connection geometries, tested under two different loading conditions: (i) pure bending and (ii) shear bending conditions. For all the experiments, global and...

Replication Models for: A finger-joint based edge connection for the weak direction of CLT plates

Apr 6, 2022 - Publications

Tapia Camú, Cristóbal; Claus, Marian, 2022, "Replication Models for: A finger-joint based edge connection for the weak direction of CLT plates", https://doi.org/10.18419/DARUS-1259, DaRUS, V1

This repository contains the implementation of the analytical and numerical models described and used in the paper to model the developed edge connection for CLT plates in the weak direction. The connection was developed within the frame of the cluster "Integrative Computational Design and Construction for Architecture" (IntCDC) of the University o...

Replication Data for: Bond line characteristics of a new screw-glued edge connection for the secondary load-bearing direction of CLT plates

Sep 24, 2021 - IntCDC

Tapia Camú, Cristóbal; Claus, Marian; Aicher, Simon, 2021, "Replication Data for: Bond line characteristics of a new screw-glued edge connection for the secondary load-bearing direction of CLT plates", https://doi.org/10.18419/DARUS-2153, DaRUS, V1, UNF:6:dSQ9iue/duvwotJZTCj2XQ== [fileUNF]

This repository contains experimental data obtained from block shear tests performed on the bond surfaces of the connection for CLT plates presented in a related paper. Additional to the recorded shear strengths, the thickness of the bond surface was recorded at different locations, which was used to create a 2D contour plot of the thickness distri...

Add Data

Share Dataverse

Link Dataverse

Reset Modifications