1 to 10 of 28 Results
Dec 7, 2023 - Heat Transport Atmosphere Subsurface Interface
Nißler, Elisabeth; Haslauer, Claus, 2023, "Docker Container to setup modelling environment and create results for a 1-D-model", https://doi.org/10.18419/darus-3552, DaRUS, V2, UNF:6:0uYc7xtFqUBZBOg+C0dx2g== [fileUNF]
The Dumux source code is provided in a docker container, which compiles and produces an executable, which models heat transport and water flow from the atmosphere to the subsurface. The needed boundary and initial conditions for four locations, modeled in our paper "Vadose Zone J... |
Nov 17, 2023 - DuMux
Buntic, Ivan; Coltman, Edward; Flemisch, Bernd; Ghosh, Tufan; Gläser, Dennis; Grüninger, Christoph; Hommel, Johannes; Keim, Leon; Kelm, Mathis; Koch, Timo; Kostelecky, Anna Mareike; Lipp, Melanie; Oukili, Hamza; Schneider, Martin; Utz, Martin; Wang, Yue; Weishaupt, Kilian; Wendel, Kai; Winter, Roman; Wu, Hanchuan, 2023, "DuMux 3.8.0", https://doi.org/10.18419/darus-3788, DaRUS, V1
Release 3.8.0 of DuMux, DUNE for Multi-{Phase, Component, Scale, Physics, ...} flow and transport in porous media. DuMux is a free and open-source simulator for flow and transport processes in and around porous media. It is based on the Distributed and Unified Numerics Environmen... |
Sep 6, 2023 - Publication: Development of stochastically reconstructed 3D porous media micromodels using additive manufacturing: numerical and experimental validation
Lee, Dongwon; Ruf, Matthias; Yiotis, Andreas; Steeb, Holger, 2023, "Numerical investigation results of 3D porous structures using stochastic reconstruction algorithm", https://doi.org/10.18419/darus-3244, DaRUS, V1
This dataset contains the outcomes of conducted numerical simulations, rooted in designs generated using a stochastic algorithm devised by Quiblie (1984), Adler et al. (1990), and Hyman et al. (2014). Moreover, the investigation employed Lattice Boltzmann simulation, as used in p... |
Sep 6, 2023 - Publication: Development of stochastically reconstructed 3D porous media micromodels using additive manufacturing: numerical and experimental validation
Ruf, Matthias; Lee, Dongwon; Yiotis, Andreas; Steeb, Holger, 2023, "micro-XRCT datasets of stochastically reconstructed 3D porous media micromodels manufactured by additive manufacturing", https://doi.org/10.18419/darus-3243, DaRUS, V1
This dataset contains micro X-ray Computed Tomography (micro-XRCT) scan data sets (projection, reconstructed, and binarized images) of 3D porous media micromodels manufactured by additive manufacturing using the Material Jetting (MJ) method. The micromodel geometries were designe... |
Sep 4, 2023Publications
This dataverse includes the underlying measurment and simulation data of the publication: Lee, D., Ruf, M., Karadimitriou, N., Steeb, H., Manousidaki, M., Varouchakis, E.A., Tzortzakis, S., & Yiotis, A. (2023). Development of stochastically reconstructed 3D porous media micromode... |
Aug 12, 2023 - Heat Transport Atmosphere Subsurface Interface
Nißler, Elisabeth; Haslauer, Claus, 2023, "Measured hydrometeorologic data", https://doi.org/10.18419/darus-3554, DaRUS, V1, UNF:6:9PXOFK5+VzehIvMwvUZNbA== [fileUNF]
Solving the energy balance at the atmosphere-subsurface interface drives heat input (in the summer) into the subsurface. We use this subsequently to calculate heat transport and water flow into the subsurface and then to calculate temperature s around drinking-water supply pipes.... |
Aug 12, 2023 - Heat Transport Atmosphere Subsurface Interface
Nißler, Elisabeth; Haslauer, Claus, 2023, "Measurements of soil temperatures and moisture content", https://doi.org/10.18419/darus-3555, DaRUS, V1, UNF:6:IwBAvjAvgcFWOI/sZ+DQmA== [fileUNF]
These measurements are taken in the subsurface at the pilot site next to the weather station of the University of Stuttgart and used to calibrate and validate our pde-based model. The subsurface has been instrumented with 64 temperature sensors, 8 soil moisture sensors. There are... |
Aug 4, 2023 - Publication: Microfluidic experiments
Karadimitriou, Nikolaos; Lee, Dongwon; Steeb, Holger, 2023, "Visual characterization of displacement processes in porous media", https://doi.org/10.18419/darus-3615, DaRUS, V1
This dataset correlates to the submitted article to IEEE VIS 2023, entitled “Visual Analysis of Displacement Processes in Porous Media using Spatio-Temporal Flow Graphs”, by Straub et al. 2023. More specifically, this data set is the one used to create the graphs shown in all Fig... |
Jun 26, 2023VEGAS
Data relevant for the paper Nissler, Scherrer, Class, Müller, Hermannspan, Osmancevic, Haslauer, 2023 Pilot site next to the weather station of the university of Stuttgart, back-filled trench, two land-uses; Timeseries of subsurface temperature and soil moisture measurements; Tim... |
