1 to 10 of 32 Results
Tapia Camú, Cristóbal; Claus, Marian; Aicher, Simon, 2021, "Replication Data for: Bond line characteristics of a new screw-glued edge connection for the secondary load-bearing direction of CLT plates", https://doi.org/10.18419/darus-2153, DaRUS, V1, UNF:6:dSQ9iue/duvwotJZTCj2XQ== [fileUNF]
This repository contains experimental data obtained from block shear tests performed on the bond surfaces of the connection for CLT plates presented in a related paper. Additional to the recorded shear strengths, the thickness of the bond surface was recorded at different locatio... |
TAR Archive - 24.3 KB -
MD5: 33db881cf3f39b29359cc578579ed327
Python scripts used to generate the tables and plots presented in the paper based on the experimental data. View README.md file for more detailed steps to reproduce the analysis. |
Tabular Data - 1.3 KB - 3 Variables, 92 Observations - UNF:6:Cyou1bO+QPyzfhZGLR+QBA==
Data corresponding to the measured bond line thickness over the horizontal wide finger surface located at the compression side of the connection. Coordinates (x,y) and bond line thickness in [mm]. |
Tabular Data - 1.3 KB - 3 Variables, 92 Observations - UNF:6:DBoSP/EsBuxWL6yvBfhELg==
Data corresponding to the measured bond line thickness over the horizontal wide finger surface located at the tension side of the connection. Coordinates (x,y) and bond line thickness in [mm]. |
Tabular Data - 1.1 KB - 3 Variables, 79 Observations - UNF:6:e1lsDOV2X/SQrrgLNPvbFg==
Data corresponding to the measured bond line thickness over the inclined wide finger surface located at the compression side of the connection. Coordinates (x,y) and bond line thickness in [mm]. |
Tabular Data - 1.1 KB - 3 Variables, 79 Observations - UNF:6:7VjP97MXwJwPSfyLBYlIdQ==
Data corresponding to the measured bond line thickness over the inclined wide finger surface located at the tension side of the connection. Coordinates (x,y) and bond line thickness in [mm]. |
Tabular Data - 12.6 KB - 11 Variables, 211 Observations - UNF:6:0kyC8KaeRBn+OcJ4LPX2ow==
Shear strength (Fv) and fiber breakage (FB) data for specimens corresponding to all specimens. Strength in MPa and fiber breakage in percent (%).
Definition of variables:
- 'surf_type': type of surface, i.e. either "upper" (U), "lower" (L) or "vertical" (V).
- 'surface_num': numb... |
Tabular Data - 5.1 KB - 11 Variables, 80 Observations - UNF:6:uU7oOJnqPUSdF956iTJCRw==
Shear strength (Fv) and fiber breakage (FB) data for specimens corresponding to the horizontal surfaces of alternative A. Strength in MPa and fiber breakage in percent (%).
Definition of variables:
- 'surf_type': type of surface, i.e. either "upper" (U), "lower" (L) or "vertical"... |
Tabular Data - 1.4 KB - 6 Variables, 43 Observations - UNF:6:yJ+IZvnsQz6jI5xRHGruww==
Shear strength (Fv) and fiber breakage (FB) data for specimens corresponding to the vertical surfaces of alternative A. Strength in MPa and fiber breakage in percent (%).
Definition of variables:
- 'surf_type': type of surface, i.e. either "upper" (U), "lower" (L) or "vertical" (... |
Tabular Data - 5.6 KB - 11 Variables, 88 Observations - UNF:6:ynTDasRZTZ90YDSQOzEiSw==
Shear strength (Fv) and fiber breakage (FB) data for specimens corresponding to the horizontal surfaces of alternative B. Strength in MPa and fiber breakage in percent (%).
Definition of variables:
- 'surf_type': type of surface, i.e. either "upper" (U), "lower" (L) or "vertical"... |
