1 to 10 of 13 Results
Wnuk, Markus-Christian; Jaensch, Florian; Tomzik, David Adrian; Chen, Zixiao; Terfurth, Jonathan; Kandasamy, Sivakumar; Shahabi, Jalil; Garrett, Amy; Mahmoudinezhad, Masoumeh H.; Csiszar, Akos; Xu, Weiliang; Röhrle, Oliver; Verl, Alexander, 2020, "Supplemental Material for Case Study about Challenges in Soft Tissue Manipulation", https://doi.org/10.18419/darus-482, DaRUS, V1
Supplemental image and video material for the paper "Challenges in robotic soft tissue manipulation - Problem identification based on an interdisciplinary case study of a teleoperated drawing robot in practice" presented at the 2019 conference M2VIP. The presented results are the... |
Sep 14, 2021 - isw_kar_ puplication
Kaiser, Benjamin, 2021, "Replication data for: Planning of Curvature-Optimal Smooth Paths for Industrial Robots Using Neural Networks", https://doi.org/10.18419/darus-2126, DaRUS, V1, UNF:6:wNKYRgrs4Qt6BOHEvqTtyQ== [fileUNF]
This dataset contains curvature-optimal geometry parameters for linear-linear transitions for polynomial smoothing with polynomial splines 4th order. The data was generated by offline solving the optimization problem of curvature-optimal geometry parameters for corner smoothing,... |
Nov 2, 2022 - SliMoReK Dataverse
Hinze, Christoph, 2022, "Identification data for Linear Direct Drive Forces compensation", https://doi.org/10.18419/darus-2563, DaRUS, V1
Linear direct drive forces are identified for compensation, where a linear direct drive is mounted in parallel to a ball screw feed drive axis. Please refer to Readme.md contained in the dataset for more detailed information. Nut forces are measured via 4 parallel KISTLER force s... |
Nov 3, 2022 - SliMoReK Dataverse
Hinze, Christoph; Zeh, Lukas, 2022, "Identification data for plant and friction identification", https://doi.org/10.18419/darus-3003, DaRUS, V1
Dataset for identification of a ball screw setup. Please refer to Readme.md contained in the dataset for more detailed information. Stribeck fricton with constant velocities (const_v*.mat) Slow measurement along whole axis for synchronization errors (const_vel:*.mat) slow sine fo... |
Nov 3, 2022 - SliMoReK Dataverse
Hinze, Christoph; Zeh, Lukas, 2022, "PI velocity controllers comparison", https://doi.org/10.18419/darus-3109, DaRUS, V1
The following PI-velocity controllers are compared (different parameterization methods), position control is off for all methods: Damping optimum Groß: kp=212, ki=106 Damping optimum Zirn: kp=229, ki=57 Disturbance optimum: kp=76, ki = 38 Symmetric Optimum: kp=149, ki=310 Extende... |
Nov 3, 2022 - SliMoReK Dataverse
Hinze, Christoph; Zeh, Lukas, 2022, "Validation data for comparison of SMC-PI controllers vs. P-PI controller", https://doi.org/10.18419/darus-3152, DaRUS, V1
Experimental comparison for sliding mode position controllers vs. P position controller. Please refer to Readme.md contained in the dataset for more detailed information. SMC-like controllers are: Quasi SMC qSMC with sign(s)~s/(|s| + \epsilon), k_s = 1250, epsilon=5, varying gain... |
Mar 17, 2023 - SliMoReK Dataverse
Hinze, Christoph, 2023, "Replication Data for: Increasing the Dynamic Accuracy of Ball Screw Drives with Quasi-Sliding-Mode (qSMC) Position Control", https://doi.org/10.18419/darus-3292, DaRUS, V1
To increase the dynamics of ball screw drives, a nonlinear position controller, based on sliding-mode control, is presented together with its parameterization for robust stability. The controller is validated experimentally on a ball screw axis and shown increase the controller b... |
Aug 15, 2023 - SliMoReK Dataverse
Xu, Haijia; Hinze, Christoph, 2023, "Replication Data for: Robust µ parameterization with low tuning complexity of cascaded control for feed drives", https://doi.org/10.18419/darus-3252, DaRUS, V1
Experimental dataset for model identification and validation of position controllers on a ball screw test bench. This dataset belongs to the Open Access publication "Robust µ parameterization with low tuning complexity of cascaded control for feed drives" (doi: 10.1016/j.conengpr... |
Oct 17, 2023 - 2022_DFG_IKEPa
Reichenbach, Thomas; Trautwein, Felix; Pott, Andreas; Verl, Alexander, 2023, "Measurement data for: Development of a Cable Actuator Test Rig for Identification of Dynamic Running Properties of Synthetic Fiber Ropes", https://doi.org/10.18419/darus-3600, DaRUS, V1
Measurement data and analysis scripts to investigate slip and friction effects of running synthetic fiber ropes. All measurements data is provided in the folder "Data" in form of csv files. Additionally, the motion profile is stored as nc file. The data is structured according to... |
Jan 16, 2024 - 2023_DFG_TopGen3
Helfesrieder, Nico, 2024, "Replication Data for: Anisotropic Damping and Stiffness of laminated steel parts using adhesive bonding - an empirical influence study", https://doi.org/10.18419/darus-3365, DaRUS, V1, UNF:6:iW1hKCadh2Z5CUi91DMIyg== [fileUNF]
This dataset contains all experimental data that is shown within the paper "Anisotropic Damping and Stiffness of laminated steel parts using adhesive bonding - an empirical influence study". Bending beams manufactured by Layer Laminated Manufacturing (LLM) were investigated in or... |
