Cluster of Excellence Integrative Computational Design and Construction for Architecture (EXC IntCDC)

Featured Dataverses

In order to use this feature you must have at least one published or linked dataverse.

Publish Dataverse

Are you sure you want to publish your dataverse? Once you do so it must remain published.

Publish Dataverse

This dataverse cannot be published because the dataverse it is in has not been published.

Delete Dataverse

Are you sure you want to delete your dataverse? You cannot undelete this dataverse.

Subject: Engineering Funding Information Identifier: EXC 2120/1 - 390831618 License: CC BY 4.0

11 to 15 of 15 Results

Measurement data: Laser scanning of timber buidlings Jan 17, 2023 - EXC IntCDC Associated Project 11 'Imperfection Measurements on Timber Members' Töpler, Janusch; Kuhlmann, Ulrike, 2023, "Measurement data: Laser scanning of timber buidlings", https://doi.org/10.18419/darus-3304, DaRUS, V1 The timber structures of 23 building projects were measured with a laser scanner Leica ScanStation P20 within the research project DIBt - ZP 52-5-13.194. Several buildings with concrete columns are also included in the data set. The measurements were carried out directly after as...
Experimental data for: A finger-joint based edge connection for the weak direction of CLT plates Apr 12, 2022 - IntCDC Tapia Camú, Cristóbal; Claus, Marian, 2021, "Experimental data for: A finger-joint based edge connection for the weak direction of CLT plates", https://doi.org/10.18419/darus-1344, DaRUS, V2, UNF:6:3YMGPmWE9BG0uaF+T4A8HQ== [fileUNF] This repository contains the experimental data collected for the newly developed plate-to-plate connection during the Master's Thesis of Marian Claus. The data corresponds to the two different connection geometries, tested under two different loading conditions: (i) pure bending...
Multi-storey Timber Buildings Data: Architectural and Structural Data on 350 Mass-Timber Projects from 2000-2021 Mar 25, 2022 - EXC IntCDC RP 10: Co-Design from Architectural, Historical and Social Science Perspectives Svatoš-Ražnjević, Hana; Menges, Achim, 2022, "Multi-storey Timber Buildings Data: Architectural and Structural Data on 350 Mass-Timber Projects from 2000-2021", https://doi.org/10.18419/darus-2733, DaRUS, V1, UNF:6:xlRfMRPJi3bK2P5FAkxLhw== [fileUNF] This repository contains a collection of data on 350 contemporary multi-storey timber building projects. The dataset consists of information on 300 projects built between 2000 and 2021, 12 projects in construction, and 38 design proposals. The dataset consists of quantitative and...
Replication Data for: Bond line characteristics of a new screw-glued edge connection for the secondary load-bearing direction of CLT plates Sep 24, 2021 - IntCDC Tapia Camú, Cristóbal; Claus, Marian; Aicher, Simon, 2021, "Replication Data for: Bond line characteristics of a new screw-glued edge connection for the secondary load-bearing direction of CLT plates", https://doi.org/10.18419/darus-2153, DaRUS, V1, UNF:6:dSQ9iue/duvwotJZTCj2XQ== [fileUNF] This repository contains experimental data obtained from block shear tests performed on the bond surfaces of the connection for CLT plates presented in a related paper. Additional to the recorded shear strengths, the thickness of the bond surface was recorded at different locatio...
Replication data for: Planning of Curvature-Optimal Smooth Paths for Industrial Robots Using Neural Networks Sep 14, 2021 - isw_kar_ puplication Kaiser, Benjamin, 2021, "Replication data for: Planning of Curvature-Optimal Smooth Paths for Industrial Robots Using Neural Networks", https://doi.org/10.18419/darus-2126, DaRUS, V1, UNF:6:wNKYRgrs4Qt6BOHEvqTtyQ== [fileUNF] This dataset contains curvature-optimal geometry parameters for linear-linear transitions for polynomial smoothing with polynomial splines 4th order. The data was generated by offline solving the optimization problem of curvature-optimal geometry parameters for corner smoothing,...

Measurement data: Laser scanning of timber buidlings

Jan 17, 2023 - EXC IntCDC Associated Project 11 'Imperfection Measurements on Timber Members'

Töpler, Janusch; Kuhlmann, Ulrike, 2023, "Measurement data: Laser scanning of timber buidlings", https://doi.org/10.18419/darus-3304, DaRUS, V1

The timber structures of 23 building projects were measured with a laser scanner Leica ScanStation P20 within the research project DIBt - ZP 52-5-13.194. Several buildings with concrete columns are also included in the data set. The measurements were carried out directly after as...

Experimental data for: A finger-joint based edge connection for the weak direction of CLT plates

Apr 12, 2022 - IntCDC

Tapia Camú, Cristóbal; Claus, Marian, 2021, "Experimental data for: A finger-joint based edge connection for the weak direction of CLT plates", https://doi.org/10.18419/darus-1344, DaRUS, V2, UNF:6:3YMGPmWE9BG0uaF+T4A8HQ== [fileUNF]

This repository contains the experimental data collected for the newly developed plate-to-plate connection during the Master's Thesis of Marian Claus. The data corresponds to the two different connection geometries, tested under two different loading conditions: (i) pure bending...

Multi-storey Timber Buildings Data: Architectural and Structural Data on 350 Mass-Timber Projects from 2000-2021

Mar 25, 2022 - EXC IntCDC RP 10: Co-Design from Architectural, Historical and Social Science Perspectives

Svatoš-Ražnjević, Hana; Menges, Achim, 2022, "Multi-storey Timber Buildings Data: Architectural and Structural Data on 350 Mass-Timber Projects from 2000-2021", https://doi.org/10.18419/darus-2733, DaRUS, V1, UNF:6:xlRfMRPJi3bK2P5FAkxLhw== [fileUNF]

This repository contains a collection of data on 350 contemporary multi-storey timber building projects. The dataset consists of information on 300 projects built between 2000 and 2021, 12 projects in construction, and 38 design proposals. The dataset consists of quantitative and...

Replication Data for: Bond line characteristics of a new screw-glued edge connection for the secondary load-bearing direction of CLT plates

Sep 24, 2021 - IntCDC

Tapia Camú, Cristóbal; Claus, Marian; Aicher, Simon, 2021, "Replication Data for: Bond line characteristics of a new screw-glued edge connection for the secondary load-bearing direction of CLT plates", https://doi.org/10.18419/darus-2153, DaRUS, V1, UNF:6:dSQ9iue/duvwotJZTCj2XQ== [fileUNF]

This repository contains experimental data obtained from block shear tests performed on the bond surfaces of the connection for CLT plates presented in a related paper. Additional to the recorded shear strengths, the thickness of the bond surface was recorded at different locatio...

Replication data for: Planning of Curvature-Optimal Smooth Paths for Industrial Robots Using Neural Networks

Sep 14, 2021 - isw_kar_ puplication

Kaiser, Benjamin, 2021, "Replication data for: Planning of Curvature-Optimal Smooth Paths for Industrial Robots Using Neural Networks", https://doi.org/10.18419/darus-2126, DaRUS, V1, UNF:6:wNKYRgrs4Qt6BOHEvqTtyQ== [fileUNF]

This dataset contains curvature-optimal geometry parameters for linear-linear transitions for polynomial smoothing with polynomial splines 4th order. The data was generated by offline solving the optimization problem of curvature-optimal geometry parameters for corner smoothing,...

Add Data

Share Dataverse

Link Dataverse

Reset Modifications