31 to 40 of 130 Results
May 21, 2025 - A01: Molecular detail in fluid simulations: Density Functional Theory within component and momentum balances
Bursik, Benjamin; Stierle, Rolf; Bauer, Gernot; Gross, Joachim, 2025, "Supplementary Data to: Modelling Interfacial Dynamics Using Hydrodynamic Density Functional Theory: Dynamic Contact Angles and the Role of Local Viscosity", https://doi.org/10.18419/DARUS-4528, DaRUS, V1
Several files are included here: Jupyter notebooks which can be used a) to visualize density profiles of equilibrium and dynamic droplet simulations (DFT, HDFT, MD, NEMD), and to determine the respective contact angle b) to determine and plot the center of mass position of the droplet, to calculate the average or steady-state velocity of the drople... |
May 21, 2025 - Dissertation Janusch Töpler
Töpler, Janusch, 2025, "Source code for: geometrically and materially nonlinear numerical analysis of timber beam-columns with Abaqus/CAE (Abaqus_timber_beam-column)", https://doi.org/10.18419/DARUS-5059, DaRUS, V1
This repository contains the python input code for an automated geometrically and materially nonlinear numerical analysis of timber beam-columns with Abaqus/CAE. The structural system, geometry, imperfections, loading, and material can be varied. The Abaqus_timber_beam-column model was developed in the dissertation of Janusch Töpler. |
May 21, 2025 - Dissertation Janusch Töpler
Töpler, Janusch, 2025, "Source code for: KaReMo++", https://doi.org/10.18419/DARUS-5061, DaRUS, V1
This repository contains the python code for the generation of realistically scattering stiffnesses and strengths of softwood glulam beams. The model is an extension of the Karlsruher Rechenmodell. The KaReMo++ model was developed in the dissertation of Janusch Töpler. |
May 21, 2025 - Dissertation Janusch Töpler
Töpler, Janusch, 2025, "Source code for: UMAT subroutine for material modelling of timber with Abaqus", https://doi.org/10.18419/DARUS-5062, DaRUS, V1
This repository contains a UMAT subroutine for modelling orthotropic behaviour with brittle failure for tension in the x-direction, ellipsoid elastoplastic behaviour for compression in grain direction (x-direction), and bilinear elastoplastic behaviour for shear in the xy-, xz-, and yz-planes. A stress interaction is only considered for the three s... |
May 21, 2025 - Structural Stability
Töpler, Janusch; Kuhlmann, Ulrike, 2025, "Experimental data: Lateral torsional buckling of softwood glulam beams with combined bending and axial compression", https://doi.org/10.18419/DARUS-5057, DaRUS, V1
This repository contains the experimental results of 19 lateral torsional buckling tests with combined bending and axial compression on timber beam-columns made of GL 24h. The loading, the deformations and rotations at midspan and at the supports, the dimensions, the moisture content and the weight were recorded. The modulus of elasticity and the s... |
May 21, 2025 - Structural Stability
Töpler, Janusch; Kuhlmann, Ulrike, 2025, "Experimental data: Flexural buckling of beech LVL columns", https://doi.org/10.18419/DARUS-5058, DaRUS, V1
This repository contains the experimental results of 27 flexural buckling tests on timber columns made of beech laminated veneer lumber (LVL) GL75. The loading, the deformations at midheight, the rotations at the supports, the dimensions, and the weight were recorded. The modulus of elasticity in grain direction was determined in preliminary tests. |
May 21, 2025 - 3rd Physics Institute
Steidl, Timo, 2025, "Replication Data for: 'Single V2 defect in 4H Silicon Carbide Schottky diode at low temperature'", https://doi.org/10.18419/DARUS-4810, DaRUS, V1, UNF:6:a/aFEHOEdT2cqMGvUFzD7g== [fileUNF]
Tabular style data sets to reproduce all plots in the paper. The datasets are either 1D plots with the x-values in the first column and all plotted y-curves in the following columns or pairwise if stated such. For 2D plots, the data consists of a vector containing the values of the x- and y-axis (first row and column, respectively) as well as the 2... |
May 20, 2025 - Institute of Applied Analysis and Numerical Simulation
Barthwal, Rahul; Rohde, Christian; Wang, Yue, 2025, "Software for "A generalized Riemann problem solver for a hyperbolic model governing two-layer thin film flow"", https://doi.org/10.18419/DARUS-5052, DaRUS, V1
In this project, we developed a Generalized Riemann solver for a hyperbolic model which governs first order dynamics of two-layer thin film flow under the influence of an anti-surfactant. The solver is a one-dimensional spatial-temporal coupled second-order finite-volume solver and can be utilized for further development. |
May 19, 2025 - SFB 1333 A1+B2 - Buchmeiser group, IPOC-MSF
Bhattacharya, Somnath; Atwi, Boshra; Kundu, Koushani; Frey, Wolfgang; Buchmeiser, Michael, 2025, "Replication data of Buchmeiser group for: Chromium(II)/(III) Complexes Bearing Phosphino-N-Heterocyclic Carbene and N-Chelating N-Heterocyclic Carbene Ligands and Their Use in Ethylene Oligomerization", https://doi.org/10.18419/DARUS-5053, DaRUS, V1
All primary data files associated with this publication, experimental procedures, reaction conditions and used analytical equipment can be found in detail in the experimental section or in the supporting information of the paper. Synthesized ligands (L1-L4) and and polymers (PEs) were characterized via nuclear magnetic resonance (NMR) spectroscopy... |
May 19, 2025 - SFB 1333 B3 - Laschat group, IOC
Noor, Sadia, 2025, "Replication data of A8 group for "Linker-Cluster Cooperativity in Confinement of Proline-Functionalized Zr-Based Metal-Organic Frameworks and its Effect on the Organocatalytic Aldol Reaction"", https://doi.org/10.18419/DARUS-5045, DaRUS, V1
In this study the combined theoretical and experimental approach Zr-UiO-67-MOFs with ortho-N-acylproline-functionalized biphenyl-dicarboxylate linkers were prepared and compared with the corresponding MOFs with regioisomeric meta-linkers is reported. All primary data files of measurements and processed data of the journal article mentioned under re... |
