DaRUS

Metrics

3,773,074 Downloads

Featured Dataverses

In order to use this feature you must have at least one published or linked dataverse.

Publish Dataverse

Are you sure you want to publish your dataverse? Once you do so it must remain published.

Publish Dataverse

This dataverse cannot be published because the dataverse it is in has not been published.

Delete Dataverse

Are you sure you want to delete your dataverse? You cannot undelete this dataverse.

Publication Year: 2021

101 to 110 of 924 Results

Humidity and thermal triggered Shape Memory Effect - Rheology-based numerical modelling - Dynamic Mechanical Thermal Humidity Analysis Jun 22, 2021 - Publication: Humidity and thermal triggered Shape Memory Effect - Rheology-based numerical modelling Fauser, Dominik; Steeb, Holger, 2021, "Humidity and thermal triggered Shape Memory Effect - Rheology-based numerical modelling - Dynamic Mechanical Thermal Humidity Analysis", https://doi.org/10.18419/DARUS-2021, DaRUS, V1, UNF:6:YC87IXxORCLw3+woYmYT3A== [fileUNF] This data contains iso-thermal and iso-humid shear frequency-sweep measurements of Shape Memory Polymers (SMP). The SMP is a polyurethane-based Polymer, which is produced from SMP Technologies Inc. The SMP filament were processed with a 3D printer (Ultimaker 3, Ultimaker, Geldermarsen, Netherlands). Frequency-sweeps were performed in a temperature...
Humidity and thermal triggered Shape Memory Effect - Rheology-based numerical modelling - Diffusion measurements Jun 22, 2021 - Publication: Humidity and thermal triggered Shape Memory Effect - Rheology-based numerical modelling Fauser, Dominik; Kuhn, Moritz; Steeb, Holger, 2021, "Humidity and thermal triggered Shape Memory Effect - Rheology-based numerical modelling - Diffusion measurements", https://doi.org/10.18419/DARUS-2024, DaRUS, V1, UNF:6:ig+5CuLNRHaoCQtncwbvWA== [fileUNF] This data contains diffusion measurements of Shape Memory Polymers (SMP) immersed in demineralized water. The SMP is a polyurethane-based Polymer, which is produced from SMP Technologies Inc. The SMP filament were processed with a 3D printer (Ultimaker 3, Ultimaker, Geldermarsen, Netherlands). The samples were dried in a drying oven for 10 days pri...
Replication Data for: Overcoming the model-data-fit problem in porous media: A quantitative method to compare invasion-percolation models to high-resolution data Jun 18, 2021 - Modeling Strategies for Gas migration in Subsurface Banerjee, Ishani, 2021, "Replication Data for: Overcoming the model-data-fit problem in porous media: A quantitative method to compare invasion-percolation models to high-resolution data", https://doi.org/10.18419/DARUS-1776, DaRUS, V1 This dataset contains modeling data used to obtain the results and figures in the manuscript: "Overcoming the model-data-fit problem in porous media: A quantitative method to compare invasion-percolation models to high-resolution data." In particular, the model realization data and post-processing codes for the manuscript can be found here.
High-speed synchrotron X-ray video of the laser beam cutting process in a 2 mm thick sheet of aluminium Jun 15, 2021 - Institut für Strahlwerkzeuge Lind, Jannik; Hagenlocher, Christian; Blazquez-Sanchez, David; Hummel, Marc; Olowinsky, Alexander; Weber, Rudolf; Graf, Thomas, 2021, "High-speed synchrotron X-ray video of the laser beam cutting process in a 2 mm thick sheet of aluminium", https://doi.org/10.18419/DARUS-1824, DaRUS, V1 The generation of low surface roughness of the cut edge during laser beam cutting is a challenge. The striation pattern, which determines the surface roughness, can be distinguished into regular and interrupted striations, the latter resulting in an increased surface roughness. In order to analyse their formation, the space- and time-resolved cutti...
Data for: High velocity measurements of particle rebound characteristics under erosive conditions of high pressure compressors Jun 15, 2021 - Publications Sommerfeld, Heike; Koch, Christian, 2021, "Data for: High velocity measurements of particle rebound characteristics under erosive conditions of high pressure compressors", https://doi.org/10.18419/DARUS-2025, DaRUS, V1 This data set contation experimental results of particle rebound measurements on flat plates of Ti6Al4V and stainless steel(1.4301) at high air velocites up to 350m/s and impact angles between 20-90°. The experiments are produced within the context of the research project "Time resolved simulation of particle rebound for erosion calculation in jet...
Geometry data of the measurement chamber of the erosion test rig at the institute of aircraft propulsion systems Jun 15, 2021 - Publications Sommerfeld, Heike; Koch, Christian, 2021, "Geometry data of the measurement chamber of the erosion test rig at the institute of aircraft propulsion systems", https://doi.org/10.18419/DARUS-2027, DaRUS, V1 This data set contains geometry data of the erosion test rig at the institute of aircraft propusion system. The test rig is used to investigate solid particle erosion in the context of turbomachinery application in several publications. The published test rig geometry is usefull for a numerical simulation of the test rig or to replicate the experim...
3D CT-Data for L-WZ13-10 Jun 11, 2021 - L-WZ13-10 Wendezeiger Mammadov, Gasim; Schweizer, Timo; Niklaus, Maria, 2021, "3D CT-Data for L-WZ13-10", https://doi.org/10.18419/DARUS-1785, DaRUS, V1 Research data (mostly *.hdf5 format) which was obtained by scanning the object via Computed Tomography and generating a 3D inside view of the object with non-invasive means. This dataset is part of the digital gyroscope collection. For more information about the collection and its creation, please see the documentation dataset: Niklaus, Maria, 2021...
3D Photogrammetric-Data for KK11-09-01 Jun 9, 2021 - KK11-09 Kurskreisel AN5731-1 Zhan, Kun; Niklaus, Maria, 2021, "3D Photogrammetric-Data for KK11-09-01", https://doi.org/10.18419/DARUS-1097, DaRUS, V2 Research data (.las, .ply and *.obj format) which was obtained by Photogrammetric/Computer Vision 3D digitization as well as original images which were the base for the 3D reconstruction process. Explanation about the 3D data format: Las (Is the normal data format for laser scanned point cloud data and also for photogrammetric 3D model.) Ply or P...
Replication Data for: Load-Balancing for Scalable Simulations with Large Particle Numbers Jun 7, 2021 - Publications Hirschmann, Steffen, 2021, "Replication Data for: Load-Balancing for Scalable Simulations with Large Particle Numbers", https://doi.org/10.18419/DARUS-1851, DaRUS, V1, UNF:6:WXqt4IDAIDGnJB9tcwMhdg== [fileUNF] This dataset contains input data, scripts, etc. for replicating the numerical experiments in Steffen Hirschmann's dissertation. The data is prefixed with folders indicating the specific experiment as is the processing metadata. The experiments are: 00_periodicity_experiment: Experiment in Chapter 5.1. Agglomerate moves over boundary and we inspect...
micro-XRCT data sets of a stone mastic asphalt drill core before and after a uniaxial compression test (sample 2): sample 2-3 Jun 7, 2021 - Publication: Asphalt Ruf, Matthias; Teutsch, Tim; Alber, Stefan; Steeb, Holger; Ressel, Wolfram, 2021, "micro-XRCT data sets of a stone mastic asphalt drill core before and after a uniaxial compression test (sample 2): sample 2-3", https://doi.org/10.18419/DARUS-1834, DaRUS, V1, UNF:6:QoLna7YlKfmQGxjSgS9yUA== [fileUNF] This data set contains two micro X-ray Computed Tomography (micro-XRCT) data sets resulting from region of interest scans (diameter 58.32 mm, height 46.06 mm) of the center region of a stone mastic asphalt (SMA) drill core. The drill core was scanned with identical scanner settings before ("reconstructed_20200505_01.tar.gz") and after ("reconstruct...

Humidity and thermal triggered Shape Memory Effect - Rheology-based numerical modelling - Dynamic Mechanical Thermal Humidity Analysis

Jun 22, 2021 - Publication: Humidity and thermal triggered Shape Memory Effect - Rheology-based numerical modelling

Fauser, Dominik; Steeb, Holger, 2021, "Humidity and thermal triggered Shape Memory Effect - Rheology-based numerical modelling - Dynamic Mechanical Thermal Humidity Analysis", https://doi.org/10.18419/DARUS-2021, DaRUS, V1, UNF:6:YC87IXxORCLw3+woYmYT3A== [fileUNF]

This data contains iso-thermal and iso-humid shear frequency-sweep measurements of Shape Memory Polymers (SMP). The SMP is a polyurethane-based Polymer, which is produced from SMP Technologies Inc. The SMP filament were processed with a 3D printer (Ultimaker 3, Ultimaker, Geldermarsen, Netherlands). Frequency-sweeps were performed in a temperature...

Humidity and thermal triggered Shape Memory Effect - Rheology-based numerical modelling - Diffusion measurements

Jun 22, 2021 - Publication: Humidity and thermal triggered Shape Memory Effect - Rheology-based numerical modelling

Fauser, Dominik; Kuhn, Moritz; Steeb, Holger, 2021, "Humidity and thermal triggered Shape Memory Effect - Rheology-based numerical modelling - Diffusion measurements", https://doi.org/10.18419/DARUS-2024, DaRUS, V1, UNF:6:ig+5CuLNRHaoCQtncwbvWA== [fileUNF]

This data contains diffusion measurements of Shape Memory Polymers (SMP) immersed in demineralized water. The SMP is a polyurethane-based Polymer, which is produced from SMP Technologies Inc. The SMP filament were processed with a 3D printer (Ultimaker 3, Ultimaker, Geldermarsen, Netherlands). The samples were dried in a drying oven for 10 days pri...

Replication Data for: Overcoming the model-data-fit problem in porous media: A quantitative method to compare invasion-percolation models to high-resolution data

Jun 18, 2021 - Modeling Strategies for Gas migration in Subsurface

Banerjee, Ishani, 2021, "Replication Data for: Overcoming the model-data-fit problem in porous media: A quantitative method to compare invasion-percolation models to high-resolution data", https://doi.org/10.18419/DARUS-1776, DaRUS, V1

This dataset contains modeling data used to obtain the results and figures in the manuscript: "Overcoming the model-data-fit problem in porous media: A quantitative method to compare invasion-percolation models to high-resolution data." In particular, the model realization data and post-processing codes for the manuscript can be found here.

High-speed synchrotron X-ray video of the laser beam cutting process in a 2 mm thick sheet of aluminium

Jun 15, 2021 - Institut für Strahlwerkzeuge

Lind, Jannik; Hagenlocher, Christian; Blazquez-Sanchez, David; Hummel, Marc; Olowinsky, Alexander; Weber, Rudolf; Graf, Thomas, 2021, "High-speed synchrotron X-ray video of the laser beam cutting process in a 2 mm thick sheet of aluminium", https://doi.org/10.18419/DARUS-1824, DaRUS, V1

The generation of low surface roughness of the cut edge during laser beam cutting is a challenge. The striation pattern, which determines the surface roughness, can be distinguished into regular and interrupted striations, the latter resulting in an increased surface roughness. In order to analyse their formation, the space- and time-resolved cutti...

Data for: High velocity measurements of particle rebound characteristics under erosive conditions of high pressure compressors

Jun 15, 2021 - Publications

Sommerfeld, Heike; Koch, Christian, 2021, "Data for: High velocity measurements of particle rebound characteristics under erosive conditions of high pressure compressors", https://doi.org/10.18419/DARUS-2025, DaRUS, V1

This data set contation experimental results of particle rebound measurements on flat plates of Ti6Al4V and stainless steel(1.4301) at high air velocites up to 350m/s and impact angles between 20-90°. The experiments are produced within the context of the research project "Time resolved simulation of particle rebound for erosion calculation in jet...

Geometry data of the measurement chamber of the erosion test rig at the institute of aircraft propulsion systems

Jun 15, 2021 - Publications

Sommerfeld, Heike; Koch, Christian, 2021, "Geometry data of the measurement chamber of the erosion test rig at the institute of aircraft propulsion systems", https://doi.org/10.18419/DARUS-2027, DaRUS, V1

This data set contains geometry data of the erosion test rig at the institute of aircraft propusion system. The test rig is used to investigate solid particle erosion in the context of turbomachinery application in several publications. The published test rig geometry is usefull for a numerical simulation of the test rig or to replicate the experim...

3D CT-Data for L-WZ13-10

Jun 11, 2021 - L-WZ13-10 Wendezeiger

Mammadov, Gasim; Schweizer, Timo; Niklaus, Maria, 2021, "3D CT-Data for L-WZ13-10", https://doi.org/10.18419/DARUS-1785, DaRUS, V1

Research data (mostly *.hdf5 format) which was obtained by scanning the object via Computed Tomography and generating a 3D inside view of the object with non-invasive means. This dataset is part of the digital gyroscope collection. For more information about the collection and its creation, please see the documentation dataset: Niklaus, Maria, 2021...

3D Photogrammetric-Data for KK11-09-01

Jun 9, 2021 - KK11-09 Kurskreisel AN5731-1

Zhan, Kun; Niklaus, Maria, 2021, "3D Photogrammetric-Data for KK11-09-01", https://doi.org/10.18419/DARUS-1097, DaRUS, V2

Research data (*.las, *.ply and *.obj format) which was obtained by Photogrammetric/Computer Vision 3D digitization as well as original images which were the base for the 3D reconstruction process. Explanation about the 3D data format: Las (Is the normal data format for laser scanned point cloud data and also for photogrammetric 3D model.) Ply or P...

Replication Data for: Load-Balancing for Scalable Simulations with Large Particle Numbers

Jun 7, 2021 - Publications

Hirschmann, Steffen, 2021, "Replication Data for: Load-Balancing for Scalable Simulations with Large Particle Numbers", https://doi.org/10.18419/DARUS-1851, DaRUS, V1, UNF:6:WXqt4IDAIDGnJB9tcwMhdg== [fileUNF]

This dataset contains input data, scripts, etc. for replicating the numerical experiments in Steffen Hirschmann's dissertation. The data is prefixed with folders indicating the specific experiment as is the processing metadata. The experiments are: 00_periodicity_experiment: Experiment in Chapter 5.1. Agglomerate moves over boundary and we inspect...

micro-XRCT data sets of a stone mastic asphalt drill core before and after a uniaxial compression test (sample 2): sample 2-3

Jun 7, 2021 - Publication: Asphalt

Ruf, Matthias; Teutsch, Tim; Alber, Stefan; Steeb, Holger; Ressel, Wolfram, 2021, "micro-XRCT data sets of a stone mastic asphalt drill core before and after a uniaxial compression test (sample 2): sample 2-3", https://doi.org/10.18419/DARUS-1834, DaRUS, V1, UNF:6:QoLna7YlKfmQGxjSgS9yUA== [fileUNF]

This data set contains two micro X-ray Computed Tomography (micro-XRCT) data sets resulting from region of interest scans (diameter 58.32 mm, height 46.06 mm) of the center region of a stone mastic asphalt (SMA) drill core. The drill core was scanned with identical scanner settings before ("reconstructed_20200505_01.tar.gz") and after ("reconstruct...

Add Data

Share Dataverse

Link Dataverse

Reset Modifications