Persistent Identifier
|
doi:10.18419/darus-3449 |
Publication Date
|
2023-05-12 |
Title
| Post-processed and normalized data sets for the data processing, analysis, and evaluation methods for co-design of coreless filament-wound structures |
Author
| Gil Pérez, Marta (Institute of Building Structures and Structural Design (ITKE), University of Stuttgart) - ORCID: 0000-0002-9365-5318
Mindermann, Pascal (Institute for Textile and Fiber Technologies (ITFT), University of Stuttgart) - ORCID: 0000-0002-6929-9026
Zechmeister, Christoph (Institute for Computational Design and Construction (ICD), University of Stuttgart) - ORCID: 0000-0002-2332-6252
Forster, David (Institute for Structural Mechanics (IBB), University of Stuttgart) - ORCID: 0000-0002-1069-7070
Guo, Yanan (Institute of Building Structures and Structural Design (ITKE), University of Stuttgart) - ORCID: 0000-0002-0458-6171
Hügle, Sebastian (Institute of Aircraft Design (IFB), University of Stuttgart) - ORCID: 0000-0003-0871-4713
Kannenberg, Fabian (Institute for Computational Design and Construction (ICD), University of Stuttgart) - ORCID: 0000-0003-0316-1769
Balangé, Laura (Institute of Engineering Geodesy (IIGS), University of Stuttgart) - ORCID: 0000-0003-3922-1989
Schwieger, Volker (Institute of Engineering Geodesy (IIGS), University of Stuttgart) - ORCID: 0000-0001-9055-9809
Middendorf, Peter (Institute of Aircraft Design (IFB), University of Stuttgart) - ORCID: 0000-0003-3117-3329
Bischoff, Manfred (Institute for Structural Mechanics (IBB), University of Stuttgart) - ORCID: 0000-0003-1538-4281
Menges, Achim (Institute for Computational Design and Construction (ICD), University of Stuttgart) - ORCID: 0000-0001-9055-4039
Gresser, Götz Theodor (Institute for Textile and Fiber Technologies (ITFT), University of Stuttgart) - ORCID: 0000-0001-5501-2912
Knippers, Jan (Institute of Building Structures and Structural Design (ITKE), University of Stuttgart) - ORCID: 0000-0002-6683-8004 |
Point of Contact
|
Use email button above to contact.
Gil Pérez, Marta (Institute of Building Structures and Structural Design (ITKE), University of Stuttgart)
Knippers, Jan (Institute of Building Structures and Structural Design (ITKE), University of Stuttgart) |
Description
| Post-processed and normalized data sets for specimens S2-0, S2-1, S2-2, S2-4, S2-8 and S2-9, used in Figure 14 of the publication: "Data processing, analysis, and evaluation methods for co-design of coreless filament-wound building systems", in the Journal of Computational Design and Engineering. The data allows the comparison of different geometrical, fabrication and structural parameters per segment of each specimen.
The raw data was obtained during the robotic fabrication and mechanical testing of specimens S1, S2 and S3 for the publication "Computational co-design framework for coreless wound fibre-polymer composite structures. Journal of Computational Design and Engineering 9(2), 310-32", and the complete raw data is published in the data set "Object model data sets of the case study specimens for the computational co-design framework for coreless wound fibre-polymer composite structures (V1)".
To extend the research, 6 specimens of the series S2 were chosen for further postprocessing. A representative number per segment was calculated for each data set. The fabrication data, which originally is produced per layer wound, is either accumulated or averaged for the total of layers in one segment. While for the geometrical or structural data, the average or maximum number of all bar elements in one segment was chosen. These decisions were taken to find representative values based on the experience of the researchers, and it is described in the data set. Finally, by normalizing all data with respect to the 6 specimens and all segments, the data can be analyzed in the same format, making compatible the comparison of geometrical, structural and fabrication data to find interrelations and possible reasons for the failure of the specimens during the mechanical test. (2023-05-05) |
Subject
| Engineering |
Keyword
| Fibre-Reinforced Plastic (FRP) (Wikidata) https://www.wikidata.org/wiki/Q263125
Structural Analysis (Wikidata) https://www.wikidata.org/wiki/Q1762403
Cross Section (Wikidata) https://www.wikidata.org/wiki/Q17128025
Robotic Fabrication
Coreless Filament Winding |
Topic Classification
| Co-Design https://www.wikidata.org/wiki/Q16972712 |
Related Publication
| Gil Pérez, M., Mindermann, P., Zechmeister, C., Forster, D., Guo, Y., Hügle, S., Kannenberg, F., Balangé, L., Schwieger, V., Middendorf, P., Bischoff, M., Menges, A., Gresser, G. T. & Knippers, J. (2023). Data processing, analysis, and evaluation methods for co-design of coreless filament-wound building systems. Journal of Computational Design and Engineering, 10, 1460-1478 doi: 10.1093/jcde/qwad064 https://doi.org/10.1093/jcde/qwad064
Gil Pérez, M., Zechmeister, C., Kannenberg, F., Mindermann, P., Balangé, L., Guo, Y., Hügle, S., Gienger, A., Forster, D., Bischoff, M., Tarín, C., Middendorf, P., Schwieger, V., Gresser, G., Menges, A., & Knippers, J. (2022). Computational co-design framework for coreless wound fibre-polymer composite structures. Journal of Computational Design and Engineering 9(2), 310-32. doi: 10.1093/jcde/qwab081 https://doi.org/10.1093/jcde/qwab081 |
Contributor
| Data Curator : Gil Pérez, Marta
Data Collector : Mindermann, Pascal
Data Collector : Zechmeister, Christoph
Data Collector : Forster, David
Data Collector : Guo, Yanan
Researcher : Hügle, Sebastian
Researcher : Kannenberg, Fabian
Researcher : Balangé, Laura
Supervisor : Schwieger, Volker
Supervisor : Middendorf, Peter
Supervisor : Bischoff, Manfred
Supervisor : Menges, Achim
Supervisor : Gresser, Götz Theodor
Supervisor : Knippers, Jan |
Funding Information
| DFG: EXC 2120/1 - 390831618 |
Project
| EXC IntCDC (Level 0)
Research Project 11 (Level 1)
Research Project 12 (Level 1)
Research Project 14 (Level 1)
Research Project 18 (Level 1) |
Depositor
| Gil Pérez, Marta |
Deposit Date
| 2023-05-05 |
Data Type
| testing data; structural data; fabrication data; geometrical data |
Series
| Specimen S2 |
Related Dataset
| Gil Pérez, M., Zechmeister, C., Kannenberg, F., Mindermann, P., Balangé, L., Guo, Y., Hügle, S., Gienger, A., Forster, D., Bischoff, M., Tarín, C., Middendorf, P., Schwieger, V., Gresser, G. T., Menges, A., & Knippers, J. (2023). Object model data sets of the case study specimens for the computational co-design framework for coreless wound fibre-polymer composite structures (V1). doi:10.18419/darus-3375 |