1 to 6 of 6 Results
Hinterkopf, Christoph, 2024, "Data for: "Influence of beam parameters on the capillary formation in partial and full penetration in high speed laser beam welding of metals"", https://doi.org/10.18419/darus-2111, DaRUS, V1
In this experiment copper and aluminum were partially and fully penetrated at high speed with a laser beam. The structure as well as the depth of the capillary were filmed with an X-Ray machine. The video footage were used to reconstruct and later ray traced to analyse the therma... |
Hoßfeld, Max, 2023, "Supplementary Data for Paper "On Friction, Heat Input and Material Flow Initiation During Friction Stir Welding: Tool and Process Optimization"", https://doi.org/10.18419/darus-3315, DaRUS, V1
This repository is related to the publication "On Friction, Heat Input and Material Flow Initiation During Friction Stir Welding: Tool and Process Optimization" (JMMP). The repository contains an example video, an overview of the experimental setup and additional diagrams for the... |
Faure, Frauke; Hagenlocher, Christian; Lind, Jannik; Wagner, Jonas; Weber, Rudolf; Graf, Thomas, 2022, "10 kHz x-ray video of laser beam welding of copper", https://doi.org/10.18419/darus-2086, DaRUS, V1
At the X-ray facility at the IFSW, so far it has been possible to record videos with a framerate of 1 kHz to 3 kHz. In this setup the X-rays propagate through the workpiece and are filmed by the high-speed camera via a projection on the scintilator. Through a new sample formation... |
Hagenlocher, Christian; Boley, Steffen, 2022, "Infrared imaging of laser based direct energy deposition of AlMg5 wire", https://doi.org/10.18419/darus-2242, DaRUS, V1, UNF:6:hJjhqJEMD0Y6k8xQqETXMw== [fileUNF]
The data shows temperature fields, which were recorded during laser-based direct energy deposition of AlMg5 wires by means of infrared imaging. All captured temperature fields are given as sequences of csv data. Each frame of the acquired image sequences is represented by its ind... |
Sep 16, 2021
Wagner, Jonas; Hagenlocher, Christian; Fetzer, Florian; Böhm, Constantin; Weber, Rudolf; Weihe, Stefan; Graf, Thomas, 2021, "Replication Data for: Numerical Analysis of the Local Solidification Conditions in Laser Beam Welding of Aluminum Alloys", https://doi.org/10.18419/darus-2106, DaRUS, V1
The here published experimental data was done in a collaborative DFG project between IFSW and MPA (project number 398552773). The published data is replication data for a publication. The data show high-speed videos of full-penetration laser beam welding of the aluminum alloy EN... |
Böhm, Constantin; Hagenlocher, Christian; Wagner, Jonas; Graf, Thomas; Weihe, Stefan, 2021, "Replication Data for: Analytical Description of the Criterion for the Columnar-To-Equiaxed Transition During Laser Beam Welding of Aluminum Alloys", https://doi.org/10.18419/darus-2075, DaRUS, V1
The here published experimental data was done in a collaborative DFG project between IFSW and MPA (project number 398552773). The published data is repilcation data for a publication. In this project laser beam weld trials were conducted and the resulting weld seams were prepared... |
