1 to 10 of 15 Results
Tapia Camú, Cristóbal; Aicher, Simon, 2023, "Replication Data for: A new concept for column-to-column connections for multi-storey timber buildings - Numerical and experimental investigations", https://doi.org/10.18419/darus-3318, DaRUS, V2, UNF:6:gvvNiEJEFzTByhaIsaPJVQ== [fileUNF]
This repository contains the experimental data of the tests described in the paper, as well as the python scripts used for the analysis of the data. Also, the finite element model in form of an Abaqus python script is included. |
Tapia Camú, Cristóbal, 2023, "Replication Data for: Holes in glulam - Orientation and design of internal reinforcements", https://doi.org/10.18419/darus-3440, DaRUS, V1
This repository contains the finite element models for Abaqus used to generate the results shown in the paper. The models are written in Python and were tested with Abaqus v2016. Three models are provided: Model of a glulam beam with a circular hole without reinforcement Model of... |
Böhm, Constantin, 2023, "Erweiterter Anhang zur Dissertation "Entwicklung einer Gefügekarte für Laserstrahlschweißnähte aus Aluminiumlegierungen"", https://doi.org/10.18419/darus-2825, DaRUS, V1, UNF:6:uIBdac2xikylaWsjsT8jvQ== [fileUNF]
Das Datenset ist der erweiterte Anhang der Dissertation "Entwicklung einer Gefügekarte für Laserstrahlschweißnähte aus Aluminiumlegierungen" und enthält Abbildungen sowie Daten aus den einzelnen Kapiteln. Das Datenset soll die Weiterverwendung der Abbildungen sowie der erzeugten... |
Tapia Camú, Cristóbal; Claus, Marian, 2021, "Experimental data for: A finger-joint based edge connection for the weak direction of CLT plates", https://doi.org/10.18419/darus-1344, DaRUS, V2, UNF:6:3YMGPmWE9BG0uaF+T4A8HQ== [fileUNF]
This repository contains the experimental data collected for the newly developed plate-to-plate connection during the Master's Thesis of Marian Claus. The data corresponds to the two different connection geometries, tested under two different loading conditions: (i) pure bending... |
Tapia Camú, Cristóbal; Claus, Marian, 2022, "Replication Models for: A finger-joint based edge connection for the weak direction of CLT plates", https://doi.org/10.18419/darus-1259, DaRUS, V1
This repository contains the implementation of the analytical and numerical models described and used in the paper to model the developed edge connection for CLT plates in the weak direction. The connection was developed within the frame of the cluster "Integrative Computational... |
Tapia Camú, Cristóbal, 2022, "Source code for: Stuttgart Stochastic Strength Glulam Model (S3GluM)", https://doi.org/10.18419/darus-1155, DaRUS, V1
This repository contains the stochastic finite element model developed to study the stiffness and strength variation of glulam beams. The S3GluM model was developed during the PhD thesis of Cristóbal Tapia Camú. |
|
Repository containing the relevant data and code for the PhD of Cristóbal Tapia Camú |
Tapia Camú, Cristóbal; Claus, Marian; Aicher, Simon, 2021, "Replication Data for: Bond line characteristics of a new screw-glued edge connection for the secondary load-bearing direction of CLT plates", https://doi.org/10.18419/darus-2153, DaRUS, V1, UNF:6:dSQ9iue/duvwotJZTCj2XQ== [fileUNF]
This repository contains experimental data obtained from block shear tests performed on the bond surfaces of the connection for CLT plates presented in a related paper. Additional to the recorded shear strengths, the thickness of the bond surface was recorded at different locatio... |
Böhm, Constantin; Hagenlocher, Christian; Wagner, Jonas; Graf, Thomas; Weihe, Stefan, 2021, "Replication Data for: Analytical Description of the Criterion for the Columnar-To-Equiaxed Transition During Laser Beam Welding of Aluminum Alloys", https://doi.org/10.18419/darus-2075, DaRUS, V1
The here published experimental data was done in a collaborative DFG project between IFSW and MPA (project number 398552773). The published data is repilcation data for a publication. In this project laser beam weld trials were conducted and the resulting weld seams were prepared... |
Aug 4, 2021
We do research on additive manufacturing, joining and welding technology as well as residual stress measurement. We further develop these procedures through multiphysical process simulations and experimental tests. We are happy to provide you with our expertise and services. |
