1 to 10 of 27 Results
Nov 3, 2022 - SliMoReK Dataverse
Hinze, Christoph; Zeh, Lukas, 2022, "Validation data for comparison of SMC-PI controllers vs. P-PI controller", https://doi.org/10.18419/darus-3152, DaRUS, V1
Experimental comparison for sliding mode position controllers vs. P position controller. Please refer to Readme.md contained in the dataset for more detailed information. SMC-like controllers are: Quasi SMC qSMC with sign(s)~s/(|s| + \epsilon), k_s = 1250, epsilon=5, varying gain... |
Feb 10, 2020 - 2019 M2VIP Challenges in Soft Tissue Manipulation
Wnuk, Markus-Christian; Jaensch, Florian; Tomzik, David Adrian; Chen, Zixiao; Terfurth, Jonathan; Kandasamy, Sivakumar; Shahabi, Jalil; Garrett, Amy; Mahmoudinezhad, Masoumeh H.; Csiszar, Akos; Xu, Weiliang; Röhrle, Oliver; Verl, Alexander, 2020, "Supplemental Material for Case Study about Challenges in Soft Tissue Manipulation", https://doi.org/10.18419/darus-482, DaRUS, V1
Supplemental image and video material for the paper "Challenges in robotic soft tissue manipulation - Problem identification based on an interdisciplinary case study of a teleoperated drawing robot in practice" presented at the 2019 conference M2VIP. The presented results are the... |
Oct 19, 2022ISW Data Repository
Data repository for the DFG project SliMoReK (Project no 438835664): Sliding-Mode-Maschinentischregelung zur Verbesserung des dynamischen Verhaltens von Vorschubachsen mit Kugelgewindetrieb Sliding mode machine table control to improve the dynamic behavior of feed drives with bal... |
Aug 15, 2023 - SliMoReK Dataverse
Xu, Haijia; Hinze, Christoph, 2023, "Replication Data for: Robust µ parameterization with low tuning complexity of cascaded control for feed drives", https://doi.org/10.18419/darus-3252, DaRUS, V1
Experimental dataset for model identification and validation of position controllers on a ball screw test bench. This dataset belongs to the Open Access publication "Robust µ parameterization with low tuning complexity of cascaded control for feed drives" (doi: 10.1016/j.conengpr... |
Sep 14, 2021 - isw_kar_ puplication
Kaiser, Benjamin, 2021, "Replication data for: Planning of Curvature-Optimal Smooth Paths for Industrial Robots Using Neural Networks", https://doi.org/10.18419/darus-2126, DaRUS, V1, UNF:6:wNKYRgrs4Qt6BOHEvqTtyQ== [fileUNF]
This dataset contains curvature-optimal geometry parameters for linear-linear transitions for polynomial smoothing with polynomial splines 4th order. The data was generated by offline solving the optimization problem of curvature-optimal geometry parameters for corner smoothing,... |
Mar 21, 2024 - 2019_DFG_ZRA_Gleichlaufkompensation
Steinle, Lukas, 2024, "Replication Data for: Learning Compensation of the State-Dependent Transmission Errors in Rack-and-Pinion Drives", https://doi.org/10.18419/darus-3759, DaRUS, V1, UNF:6:yyyPRR4Wz8WOv1lj5nOToA== [fileUNF]
This dataset contains all experimental data that is shown within the paper "Learning Compensation of the State-Dependent Transmission Errors in Rack-and-Pinion Drives". Rack-and-pinion drives are commonly used in large machine tools to provide linear motion of heavy loads over lo... |
Mar 17, 2023 - SliMoReK Dataverse
Hinze, Christoph, 2023, "Replication Data for: Increasing the Dynamic Accuracy of Ball Screw Drives with Quasi-Sliding-Mode (qSMC) Position Control", https://doi.org/10.18419/darus-3292, DaRUS, V1
To increase the dynamics of ball screw drives, a nonlinear position controller, based on sliding-mode control, is presented together with its parameterization for robust stability. The controller is validated experimentally on a ball screw axis and shown increase the controller b... |
Mar 28, 2024 - ISW Timo König Cornuspline path planning algorithm for the fabrication of coreless wound fibre-polymer composite structures
König, Timo, 2024, "Replication Data for: Cornuspline path planning algorithm for the fabrication of coreless wound fiber-polymer composite structures", https://doi.org/10.18419/darus-3577, DaRUS, V1, UNF:6:LRhHzlkFvUo/LckJmnuntQ== [fileUNF]
This dataset contains all the validation data that presented within the paper "Cornuspline path planning algorithm for the fabrication of coreless wound fiber-polymer composite structures". This paper presents a spline path planning algorithm based on clothoids. This algorithm co... |