1 to 10 of 13 Results
Apr 2, 2024 - 2018_DFG_IMPULS
Schulte, Alexander, 2024, "Replication Data for: Control Comparison of Impact Actuator", https://doi.org/10.18419/darus-3763, DaRUS, V1, UNF:6:bIJ2jkFx4tiIxBORfqfLSw== [fileUNF]
The Dataset contains the data, that was created simulating and measuring different control strategies for the impact actuator. Each table contains the time value, the set position and the actual position for the base axes as well as the actuators when executing a reference contou... |
Mar 28, 2024 - ISW Timo König Cornuspline path planning algorithm for the fabrication of coreless wound fibre-polymer composite structures
König, Timo, 2024, "Replication Data for: Cornuspline path planning algorithm for the fabrication of coreless wound fiber-polymer composite structures", https://doi.org/10.18419/darus-3577, DaRUS, V1, UNF:6:LRhHzlkFvUo/LckJmnuntQ== [fileUNF]
This dataset contains all the validation data that presented within the paper "Cornuspline path planning algorithm for the fabrication of coreless wound fiber-polymer composite structures". This paper presents a spline path planning algorithm based on clothoids. This algorithm co... |
Mar 21, 2024 - 2019_DFG_ZRA_Gleichlaufkompensation
Steinle, Lukas, 2024, "Replication Data for: Learning Compensation of the State-Dependent Transmission Errors in Rack-and-Pinion Drives", https://doi.org/10.18419/darus-3759, DaRUS, V1, UNF:6:yyyPRR4Wz8WOv1lj5nOToA== [fileUNF]
This dataset contains all experimental data that is shown within the paper "Learning Compensation of the State-Dependent Transmission Errors in Rack-and-Pinion Drives". Rack-and-pinion drives are commonly used in large machine tools to provide linear motion of heavy loads over lo... |
Jan 16, 2024 - 2023_DFG_TopGen3
Helfesrieder, Nico, 2024, "Replication Data for: Anisotropic Damping and Stiffness of laminated steel parts using adhesive bonding - an empirical influence study", https://doi.org/10.18419/darus-3365, DaRUS, V1, UNF:6:iW1hKCadh2Z5CUi91DMIyg== [fileUNF]
This dataset contains all experimental data that is shown within the paper "Anisotropic Damping and Stiffness of laminated steel parts using adhesive bonding - an empirical influence study". Bending beams manufactured by Layer Laminated Manufacturing (LLM) were investigated in or... |
Oct 17, 2023 - 2022_DFG_IKEPa
Reichenbach, Thomas; Trautwein, Felix; Pott, Andreas; Verl, Alexander, 2023, "Measurement data for: Development of a Cable Actuator Test Rig for Identification of Dynamic Running Properties of Synthetic Fiber Ropes", https://doi.org/10.18419/darus-3600, DaRUS, V1
Measurement data and analysis scripts to investigate slip and friction effects of running synthetic fiber ropes. All measurements data is provided in the folder "Data" in form of csv files. Additionally, the motion profile is stored as nc file. The data is structured according to... |
Aug 15, 2023 - SliMoReK Dataverse
Xu, Haijia; Hinze, Christoph, 2023, "Replication Data for: Robust µ parameterization with low tuning complexity of cascaded control for feed drives", https://doi.org/10.18419/darus-3252, DaRUS, V1
Experimental dataset for model identification and validation of position controllers on a ball screw test bench. This dataset belongs to the Open Access publication "Robust µ parameterization with low tuning complexity of cascaded control for feed drives" (doi: 10.1016/j.conengpr... |
Mar 17, 2023 - SliMoReK Dataverse
Hinze, Christoph, 2023, "Replication Data for: Increasing the Dynamic Accuracy of Ball Screw Drives with Quasi-Sliding-Mode (qSMC) Position Control", https://doi.org/10.18419/darus-3292, DaRUS, V1
To increase the dynamics of ball screw drives, a nonlinear position controller, based on sliding-mode control, is presented together with its parameterization for robust stability. The controller is validated experimentally on a ball screw axis and shown increase the controller b... |
Nov 3, 2022 - SliMoReK Dataverse
Hinze, Christoph; Zeh, Lukas, 2022, "Validation data for comparison of SMC-PI controllers vs. P-PI controller", https://doi.org/10.18419/darus-3152, DaRUS, V1
Experimental comparison for sliding mode position controllers vs. P position controller. Please refer to Readme.md contained in the dataset for more detailed information. SMC-like controllers are: Quasi SMC qSMC with sign(s)~s/(|s| + \epsilon), k_s = 1250, epsilon=5, varying gain... |
Nov 3, 2022 - SliMoReK Dataverse
Hinze, Christoph; Zeh, Lukas, 2022, "PI velocity controllers comparison", https://doi.org/10.18419/darus-3109, DaRUS, V1
The following PI-velocity controllers are compared (different parameterization methods), position control is off for all methods: Damping optimum Groß: kp=212, ki=106 Damping optimum Zirn: kp=229, ki=57 Disturbance optimum: kp=76, ki = 38 Symmetric Optimum: kp=149, ki=310 Extende... |
Nov 3, 2022 - SliMoReK Dataverse
Hinze, Christoph; Zeh, Lukas, 2022, "Identification data for plant and friction identification", https://doi.org/10.18419/darus-3003, DaRUS, V1
Dataset for identification of a ball screw setup. Please refer to Readme.md contained in the dataset for more detailed information. Stribeck fricton with constant velocities (const_v*.mat) Slow measurement along whole axis for synchronization errors (const_vel:*.mat) slow sine fo... |
