Institut für Strahlwerkzeuge

Featured Dataverses

In order to use this feature you must have at least one published dataverse.

Publish Dataverse

Are you sure you want to publish your dataverse? Once you do so it must remain published.

Publish Dataverse

This dataverse cannot be published because the dataverse it is in has not been published.

Delete Dataverse

Are you sure you want to delete your dataverse? You cannot undelete this dataverse.

Processing Methods Name: X-Ray Illumination

1 to 2 of 2 Results

Comparison of heat conduction mode and deep penetration mode by means of high-speed synchrotron X-ray videos during laser beam welding Aug 31, 2021 Hagenlocher, Christian; Lind, Jannik; Wagner, Jonas; Hummel, Marc; Olowinsky, Alexander; Weber, Rudolf; Graf, Thomas, 2021, "Comparison of heat conduction mode and deep penetration mode by means of high-speed synchrotron X-ray videos during laser beam welding", https://doi.org/10.18419/darus-2078, DaRUS, V2 There are two modes of laser beam welding: the heat conduction mode and the full penetration mode. The heat conduction mode is present if the intensity of the laser beam is to low to evaporate but sufficient to melt the irradiated material. This welding mode results in a very sta...
High-speed synchrotron X-ray video of the laser beam cutting process in a 2 mm thick sheet of aluminium Jun 15, 2021 Lind, Jannik; Hagenlocher, Christian; Blazquez-Sanchez, David; Hummel, Marc; Olowinsky, Alexander; Weber, Rudolf; Graf, Thomas, 2021, "High-speed synchrotron X-ray video of the laser beam cutting process in a 2 mm thick sheet of aluminium", https://doi.org/10.18419/darus-1824, DaRUS, V1 The generation of low surface roughness of the cut edge during laser beam cutting is a challenge. The striation pattern, which determines the surface roughness, can be distinguished into regular and interrupted striations, the latter resulting in an increased surface roughness. I...

Comparison of heat conduction mode and deep penetration mode by means of high-speed synchrotron X-ray videos during laser beam welding

Aug 31, 2021

Hagenlocher, Christian; Lind, Jannik; Wagner, Jonas; Hummel, Marc; Olowinsky, Alexander; Weber, Rudolf; Graf, Thomas, 2021, "Comparison of heat conduction mode and deep penetration mode by means of high-speed synchrotron X-ray videos during laser beam welding", https://doi.org/10.18419/darus-2078, DaRUS, V2

There are two modes of laser beam welding: the heat conduction mode and the full penetration mode. The heat conduction mode is present if the intensity of the laser beam is to low to evaporate but sufficient to melt the irradiated material. This welding mode results in a very sta...

High-speed synchrotron X-ray video of the laser beam cutting process in a 2 mm thick sheet of aluminium

Jun 15, 2021

Lind, Jannik; Hagenlocher, Christian; Blazquez-Sanchez, David; Hummel, Marc; Olowinsky, Alexander; Weber, Rudolf; Graf, Thomas, 2021, "High-speed synchrotron X-ray video of the laser beam cutting process in a 2 mm thick sheet of aluminium", https://doi.org/10.18419/darus-1824, DaRUS, V1

The generation of low surface roughness of the cut edge during laser beam cutting is a challenge. The striation pattern, which determines the surface roughness, can be distinguished into regular and interrupted striations, the latter resulting in an increased surface roughness. I...

Add Data

Share Dataverse

Link Dataverse

Reset Modifications