1 to 7 of 7 Results
Strahm, Benedikt; Haufe, Carl; Blandini, Lucio, 2024, "Replication Data for: Investigations on the Shear Load-Bearing Behavior of Functionally Graded Concrete Beams with Mineral Hollow Spheres", https://doi.org/10.18419/darus-3875, DaRUS, V1
Addendum to the corresponding paper. The paper describes numerical and experimental investigations of functionally graded concrete beams subjected to three-point bending tests to determine their shear capacity. The data set includes: diagrams/ Values for the load-deformation curv... |
Nov 8, 2023 - EXC IntCDC Research Project 27 'Cyber-Physical, Large-Scale Manipulation with Cable Robots'
Trautwein, Felix; Reichenbach, Thomas; Pott, Andreas; Verl, Alexander, 2023, "Replication Data for: A Predictor-Corrector-Scheme for the Geometry Planning for In-Operation-Reconfiguration of Cable-Driven Parallel Robots", https://doi.org/10.18419/darus-3682, DaRUS, V1
Measurement data to reproduce the absolute and repeatability precision before and after the reconfiguration process. The dataset contains the folder with the data in reference configuration ( /predictor_corrector_scheme_data/reference_config/) and the data in the reconfigured con... |
Oct 31, 2023 - EXC IntCDC Research Project 1 'Functionally Graded Concrete Building System – Design, Optimisation, Digital Production and Reuse'
Teichmann, Alexander; Strahm, Benedikt; Garrecht, Harald; Blandini, Lucio, 2023, "Compressive strength measurement data", https://doi.org/10.18419/darus-3753, DaRUS, V1
Raw Data on the compressive strength measurements of concrete samples that have been evaluated as follows: The goal is to investigate the influence of different mixing approaches on the compressive strength of four distinct concrete mixtures. Compressive strength is a critical pr... |
Jul 12, 2023 - EXC IntCDC RP 3: Multi-Storey Wood Building System
Orozco, Luis; Krtschil, Anna; Wagner, Hans Jakob; Knippers, Jan; Menges, Achim, 2023, "Floor Plate Segmentation Data", https://doi.org/10.18419/darus-3539, DaRUS, V1
This repository contains the geometric results of six developed computational floor plate segmentation methods as applied to sixteen example floor plans. It includes the floor plate boundaries, column locations, and plate edges for each resulting segmentation, as well as the geom... |
Töpler, Janusch; Kuhlmann, Ulrike, 2023, "Measurement data: Laser scanning of timber buidlings", https://doi.org/10.18419/darus-3304, DaRUS, V1
The timber structures of 23 building projects were measured with a laser scanner Leica ScanStation P20 within the research project DIBt - ZP 52-5-13.194. Several buildings with concrete columns are also included in the data set. The measurements were carried out directly after as... |
Tapia Camú, Cristóbal; Claus, Marian, 2021, "Experimental data for: A finger-joint based edge connection for the weak direction of CLT plates", https://doi.org/10.18419/darus-1344, DaRUS, V2, UNF:6:3YMGPmWE9BG0uaF+T4A8HQ== [fileUNF]
This repository contains the experimental data collected for the newly developed plate-to-plate connection during the Master's Thesis of Marian Claus. The data corresponds to the two different connection geometries, tested under two different loading conditions: (i) pure bending... |
Tapia Camú, Cristóbal; Claus, Marian; Aicher, Simon, 2021, "Replication Data for: Bond line characteristics of a new screw-glued edge connection for the secondary load-bearing direction of CLT plates", https://doi.org/10.18419/darus-2153, DaRUS, V1, UNF:6:dSQ9iue/duvwotJZTCj2XQ== [fileUNF]
This repository contains experimental data obtained from block shear tests performed on the bond surfaces of the connection for CLT plates presented in a related paper. Additional to the recorded shear strengths, the thickness of the bond surface was recorded at different locatio... |
