View: |
Part 1: Document Description
|
Citation |
|
---|---|
Title: |
Replication Data for: Holes in glulam - Orientation and design of internal reinforcements |
Identification Number: |
doi:10.18419/darus-3440 |
Distributor: |
DaRUS |
Date of Distribution: |
2023-04-20 |
Version: |
1 |
Bibliographic Citation: |
Tapia Camú, Cristóbal, 2023, "Replication Data for: Holes in glulam - Orientation and design of internal reinforcements", https://doi.org/10.18419/DARUS-3440, DaRUS, V1 |
Citation |
|
Title: |
Replication Data for: Holes in glulam - Orientation and design of internal reinforcements |
Identification Number: |
doi:10.18419/darus-3440 |
Authoring Entity: |
Tapia Camú, Cristóbal (University of Stuttgart) |
Distributor: |
DaRUS |
Access Authority: |
Division of Timber Constructions, MPA |
Access Authority: |
Tapia Camú, Cristóbal |
Depositor: |
Tapia Camú, Cristóbal |
Date of Deposit: |
2023-04-17 |
Holdings Information: |
https://doi.org/10.18419/DARUS-3440 |
Study Scope |
|
Keywords: |
Engineering, Holes, Glued Laminated Timber, GLT, Screw Reinforcements, Tension Perpendicular to the Grain |
Abstract: |
This repository contains the finite element models for Abaqus used to generate the results shown in the paper. The models are written in Python and were tested with Abaqus v2016. Three models are provided: <ol> <li>Model of a glulam beam with a circular hole without reinforcement</li> <li>Model of a glulam beam with a circular hole with internal reinforcements (internal reinforcements can be defined with a varying angle)</li> <li>Model of a glulam beam with a circular hole with internal reinforcements and a discrete crack at the position of maximum tensile stresses perpendicular to the grain (internal reinforcements can be defined with a varying angle)</li> </ol> |
Methodology and Processing |
|
Sources Statement |
|
Data Access |
|
Other Study Description Materials |
|
Related Publications |
|
Citation |
|
Title: |
Tapia, C., and Aicher, S. (2016). Holes in glulam - Orientation and design of internal reinforcements. In Proceedings of the World Conference on Timber Engineering (WCTE 2016). Vienna, Austria: Vienna University of Technology |
Identification Number: |
20.500.12708/172 |
Bibliographic Citation: |
Tapia, C., and Aicher, S. (2016). Holes in glulam - Orientation and design of internal reinforcements. In Proceedings of the World Conference on Timber Engineering (WCTE 2016). Vienna, Austria: Vienna University of Technology |
Label: |
install_python_libs_for_abaqus_v2016.md |
Text: |
Instructions to install required python libraries for Abaqus v2016. Versions of Abaqus newer than v2022 include these libraries in the default installation, thus, there is no need to install them manually. |
Notes: |
text/markdown |
Label: |
model_glulam_with_hole_no_reinforcement.py |
Text: |
Finite element model of a glulam beam with a hole reinforced without reinforcement. |
Notes: |
text/x-python |
Label: |
model_inclined_internal_reinforcement.py |
Text: |
Finite element model of a glulam beam with a hole reinforced with internal inclined dowel-type reinforcements. |
Notes: |
text/x-python |
Label: |
model_inclined_internal_reinforcement_with_crack.py |
Text: |
Finite element model of a glulam beam with a hole reinforced with internal inclined dowel-type reinforcements. A discrete crack is added. |
Notes: |
text/x-python |